![]() |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Just purchased another TV and installed a prodigy BC. The other unit was a draw-tite, on a Ford Freestar minivan which I did not like, because of the jerking and always having to set the control. What do you recommend for a setting on the prodigy. I am towing a 2619 with a Ford 150, 5.4L. Leaving for a 30 day trip to California next week.
crawdad |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
first off - no boost, unless you are in hilly terrain then B1 would be okay. You are in the situation where the trailer weighs less than the tow vehicle. Tell you what, rather than typing it all out from memory I will give you the link to the instructions and you can print them out....
http://www.tekonsha.com/instructions...89_H%20web.pdf ![]() Bill |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
Just follow the manufacturer instructions. I just purchased a Prodigy this week to replace the el cheapo unit I was using with the old pop-up. Setting it up took 5 minutes and you'll not be happier with a BC.
|
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Try 5.0 it's a good starting point for the TM
|
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|