Atwood "Wedgewood Terrace" Stove

Greetings, all. We have a 2005 TM 2619 with the Atwood "Wedgewood Terrace" three burner stove/oven combo. On our first outing this year we opened the oven and what I believe to be the temperature sensor was hanging free although still attached to its wire. It is attached to a little bracket and we tried to locate a tab that bracket might fit in without success. I can't remember how it was fastened but now am wondering if that little tab might have been brazed or soldered directly to the ceiling of the oven? Any suggestions as to how it was fastened and how to repair? The oven worked fine as is but it freaks DW to have that hanging down in "her" oven! -camp2canoe

[Harry Womack]

the bracket mounts to the back wall in the oven. It fits in a hole. the bracket will fall out if not bent to fit tighter. I can take a picture of the bracket if needed.

Actually I probably looked pretty silly on my knees with my head in the oven, but I wasn't able to locate the mounting spot for the sensor. I did visit a local RV dealer but, alas, no model had the same stove/oven combo. A photo would be appreciated! Thanks. camp2canoe

[Harry Womack]

I looked at the oven. It has one 3/8" hole in the back of the oven below the square vent on the back. The bracket snaps into this hole.