Arizona boy needs trailer parts

Goodyear Travels

New Member
Joined
Jun 24, 2018
Posts
4
Greetings Forum members, I haven’t posted in years under Goodyear Travels but I’m giving it a go again. I need help locating parts for my 2007 2720SL. I need the plastic slide for the sliding bathroom wall - closest to the kitchen sink. I also need the 1 1/4 inch pee trap and the glued threaded fitting for the bathroom sink. In addition - I need the plastic manifold for the water lines and shower wand for the outside shower. I had to change my email address cause my old Cox email address won’t let me attach photos. Trailmanor has not been responsive in communicating with me. Emilie, thus far, has not provided any helpful info. If I can’t get the parts to repair it - I’ll probably be selling it. That would be sad for us because we’ve taken great care of it through the years but these parts are pretty essential for us. I’ve attached pics for clarification. There’s much I can share about our TM experiences and I’ll try to re-engage with forum members. Any direction from members will be much appreciated. Eric
 

Attachments

  • IMG_4105.jpeg
    IMG_4105.jpeg
    153.5 KB · Views: 195
  • IMG_6558.jpeg
    IMG_6558.jpeg
    112.5 KB · Views: 29
  • IMG_6535.jpeg
    IMG_6535.jpeg
    115.6 KB · Views: 28
  • IMG_6536.jpeg
    IMG_6536.jpeg
    81.5 KB · Views: 34
  • IMG_6494.jpeg
    IMG_6494.jpeg
    115.3 KB · Views: 34
Welcome back. I wondered where you went. Looks like you had a major mishap in the bathroom area!
I need the plastic slide for the sliding bathroom wall - closest to the kitchen sink.
What a mess. Looks like you need both halves of the slide. The factory should be able to help, but they are short-staffed these days, so be patient. As you continue to try them, you might also contact Shane826 who is parting out a couple TMs. He may have what you need, or might be able to point to another parted-out source.
I also need the 1 1/4 inch pee trap and the glued threaded fitting for the bathroom sink.
In big box stores, 1-1/4 inch fittings often appear in a different department than 1-1/2 inch fittings. Check both. You might also check RV parts places like etrailer, pplmotorhomes, or dyers, since they often stock the reduced-size RV-specific versions of common plumbing items.
I need the plastic manifold for the water lines and shower wand for the outside shower.
As you know, TM buys and installs complete appliance assemblies from their mfr, and doesn't stock the individual parts that make up the assembly. This is the case with the shower, so you need to contact the mfr ITC Fontana.

Hope this helps

Bill
 

Attachments

  • Fontana shower.jpg
    Fontana shower.jpg
    40.7 KB · Views: 280
Welcome back. I wondered where you went. Looks like you had a major mishap in the bathroom area!

What a mess. Looks like you need both halves of the slide. The factory should be able to help, but they are short-staffed these days, so be patient. As you continue to try them, you might also contact Shane826 who is parting out a couple TMs. He may have what you need, or might be able to point to another parted-out source.

In big box stores, 1-1/4 inch fittings often appear in a different department than 1-1/2 inch fittings. Check both. You might also check RV parts places like etrailer, pplmotorhomes, or dyers, since they often stock the reduced-size RV-specific versions of common plumbing items.

As you know, TM buys and installs complete appliance assemblies from their mfr, and doesn't stock the individual parts that make up the assembly. This is the case with the shower, so you need to contact the mfr ITC Fontana.

Hope this helps

Bill
Thanks Bill, I was hoping you still walked this earth, collected your radios, and still directed this forum. I’ve already tracked down most of what I need. The silly P-trap is proving the most evasive. I’ve had a great variety of medical challenges since my previous posting - including complete ankle replacement, disc removal, bone graft and fusion of lower lumbar, prostate surgery (a PAE procedure) which still leaves me with full-function, and some basal skin cancer carvage. But God has brought me through everything and I hardly know I’ve been worked on. So, I feel I can manage our TM for a few more years but it seems to require more and more repairs. I’m retired now so I have the time and patience. Adjusting valve lash and rejetting the carb for a trip up the Rim in a few weeks. My Yamaha EF2400is struggles with the AC and I haven’t installed a starter kit yet. Hoping to give it a little boost. Hope you are well and are seeing every day as a gift. Eric
 
I just got that hinge/slide, actually just got them a couple of weeks ago. Havent opened the package yet. But unfortunately my camper has to go away, and I did offer it with that but could sell it I guess...
I dont know if the hinges for a 1997 3023 would be the same.
 

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom