2005 2720SD side window

muddymike

New Member
Joined
Nov 27, 2020
Posts
7
Location
Los Angeles, CA
I had an OOOPS backing up and broke the side window closest to the hitch on my 2005 2720SD. The window is about 25 1/4 inch wide by 23 1/4 inch high with white frame. Only the sliding window part broke, but I am not sure I can disassemble the window, so I probably need the whole window assembly.
thanks,
Mike
 
I had an OOOPS backing up and broke the side window closest to the hitch on my 2005 2720SD. The window is about 25 1/4 inch wide by 23 1/4 inch high with white frame. Only the sliding window part broke, but I am not sure I can disassemble the window, so I probably need the whole window assembly.
thanks,
Mike
Contact your local glass shop.
 
Dis-assembling the window is annoying, but not a big deal. But how much of the "window" did you break? If only the glass itself, Waverly's suggestion is probably best. But if the frame is bent or broken, you will probably want to work with Shane. I went through this a few years ago, and Hehr replacements directly from the Hehr distributor are very expensive.

The inconvenience will be this. Hehr makes probably a thousand different RV windows - literally. They have individual designs for every window on every motor home / motor coach / trailer on the market. And many of them seem identical, especially if you simply measure the dimensions. In order to know exactly which one you need, you have to unscrew the retainer ring inside the trailer that clamps the window assembly onto the wall. Once you get this ring off, you will find a white paper label with a LONG set of part numbers. This is what you must match, and if Shane's window label matches yours, you are good to go. If not, there may be a subtle difference such as a slightly different radius on a curved corner, which means the window won't quite fit right.

My story from five years ago is here
https://www.trailmanorowners.com/forum/showthread.php?t=18780&highlight=pellet
Thanks to Sonja, the parts manager at the time, I was able to get a replacement window from a scrap pile at the TM factory. You might be so lucky now ... or not. But even if you are, the window frame will be black, and you will need to be ready to paint it.

Good luck.

Bill
 
Last edited:
^ And then you have to hope that tag has survived the last 15+ years. I was looking for an operator for the rear window of my 2007 3326 and the tag was all but unreadable.
 
When I was looking for the operator for my window a few years back, TM offered to sell me a whole used window for $50 + shipping. Does that sound fair? Be warned shipping ain’t cheap right now. Where are you located? Give me an address so I can look at shipping costs.

Yeah it’s the white frame windows. Same “generation” as yours so I would imagine the windows are pretty damn close. There’s really only 4 or 5 different size windows on these things… I’ll try to get the TM opened up this weekend (I haven’t even opened it up since I got it) and get a window out if you’re seriously interested.
 

Attachments

  • 3E59A2D2-7F28-4147-9678-E93A5689CEAE.jpg
    3E59A2D2-7F28-4147-9678-E93A5689CEAE.jpg
    1 MB · Views: 1,119
  • 7434D5E0-BD36-43DB-BEE6-71C2E88E50CF.jpg
    7434D5E0-BD36-43DB-BEE6-71C2E88E50CF.jpg
    1.1 MB · Views: 1,121
That seems like a fair price. I am in zipcode 90278, Redondo Beach, CA. Address is 2412 Alvord Lane. Let me know what shipping would be. Kind of a big and delicate part. I did talk to a glass shop who quoted $40 for tempered glass replacement plus $30 to install in frame. I might go that way. The outside dimensions of the white frame on the external surface of the trailer are 25 1/4 wide by 23 1/4 high, with a 4 1/2 inch radius on outside edge of frame. I have not yet removed it from the trailer so don't have a PN, Visually it looks like a match.
 
I will tell you right now it will be cheaper to go the glass replacement route. I’m in western NY so shipping will definitely be more than $20. I wouldn’t be surprised if it’s at least $50. Let me know if I should still proceed…
 
Shane,
I did a rough check on UPS ground shipping and got $70, so I think i will pass on your offer, and try the local glass shop.
thanks for your response,
Mike
 
Upper door

I’m parting out a 2002 2619, I think it has the Hehr windows. I can probably help you out here.

I'm looking for a upper door section for a 2003 3023. I suspect the door is the same across several models. Do you have one? Thanks, David T.
 
MuddyMike said:
I did a rough check on UPS ground shipping and got $70 ...

My experience is that UPS tends to have high shipping costs for retail customers. I recommend that anyone planning to ship something check out USPS.com. In July 2023, the post office introduced something called Ground Advantage. It appears to be similar to Priority Mail - which is still offered - but a bit slower and a lot cheaper, and box sizes are not pre-determined. My wife recently sent something that clocked in at over $30 Priority, but less than $11 by Ground. Delivery was only one day later.

Just my observation ...

Bill
 
Last edited:
I'm looking for a upper door section for a 2003 3023. I suspect the door is the same across several models. Do you have one? Thanks, David T.

I do, but not right at this time. I have a new upper door (long story) that I’m going to put on my project 2000 2720, at which point I’ll have that door available, minus the window. But the project 2720 is in storage and I don’t have access to it until April…

If you can wait till Spring I’m sure we can be in business.
 
My experience is that UPS tends to have high shipping costs for retail customers. I recommend that anyone planning to ship something check out USPS.com. In July 2023, the post office introduced something called Ground Advantage. It appears to be similar to Priority Mail - which is still offered - but a bit slower and a lot cheaper, and box sizes are not pre-determined. My wife recently sent something that clocked in at over $30 Priority, but less than $11 by Ground. Delivery was only one day later.

Just my observation ...

Bill

I’ve learned while parting out this camper that it’s best to get quotes from UPS and USPS. I can’t figure out any rhyme or reason why one is cheaper than the other on some things but not others. Size and weight be damned, it’s a different outcome every time, and I think destination matters too. But I will agree… Shipping for retail customers is absolutely outrageous. I’ve had more deals fall apart because of shipping.

And oddly enough, TrailManor seems to pay retail rates to ship parts out of South Dakota.
 
I’ve learned while parting out this camper that it’s best to get quotes from UPS and USPS. I can’t figure out any rhyme or reason why one is cheaper than the other on some things but not others. Size and weight be damned, it’s a different outcome every time, and I think destination matters too. But I will agree… Shipping for retail customers is absolutely outrageous. I’ve had more deals fall apart because of shipping.

And oddly enough, TrailManor seems to pay retail rates to ship parts out of South Dakota.

Have you thought about listing your items on eBay and using eBay shipping? It's a lot cheaper.
 
Ebay shipping is cheaper than retail USPS or UPS, but the eBay fees and taxes are terrible. It is worth checking, but I'm not sure how you would come out ahead. Maybe it would work if you are shipping something that is physically big or heavy but inexpensive, so the sales tax is smaller. But be aware that the eBay tax bill includes a tax on the selling price, a tax on the listing fee, a tax on shipping, and a couple others that escape me.

Bill
 
Last edited:
I do, but not right at this time. I have a new upper door (long story) that I’m going to put on my project 2000 2720, at which point I’ll have that door available, minus the window. But the project 2720 is in storage and I don’t have access to it until April…

If you can wait till Spring I’m sure we can be in business.

I can use the door without a window. No hurry, my door is usable but is deteriorating from the inside out. When you have a chance could you post some pics? Thanks
 
I do, but not right at this time. I have a new upper door (long story) that I’m going to put on my project 2000 2720, at which point I’ll have that door available, minus the window. But the project 2720 is in storage and I don’t have access to it until April…

If you can wait till Spring I’m sure we can be in business.
Hello, Do you still have the TM upper door available?
 

Similar threads

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom