molding

I am going to attempt to attach some pictures of a rubber molding or gasket that hangs down under my kitchen slide out right over the tire. It comes out right at the wall and behind the slide out rubber molding. It would also be under the stove, approximately. It doesn't move at all but seems to...

Does anybody know of a source for window seals, molding, and weatherstripping for our beloved busses? I have a 2000 Bluebird All American rear engine bus that has the bigger transit style windows. I removed about half the windows and the few I am keeping I would like to replace all the seals...

I have a 2008 Dutchmen 28B-GS and looking for the trim insert molding that fits in the channel around the baggage doors? This is a rubberized trim and all I can find is a thin vinyl style? Any ideas?

Friends, We just bought a 2018 Jayco Flight 245RLS. Immaculate condition, however being another tinkerer I’m thinking about adding some type of caulk around the base of the walls and covering it with plastic molding. Reason is that the bottoms of walls have no protection from feet,shoes...

The moldings on my FW, 2018 28.5 located under the bedroom overhang cap and right in the curve are pulled out. They appear to be something that is removable for service or whatever. Although I can sort of force them back into the slots they sit in they don't stay there. Is this normal? Any way...

I need to reattach the molding around my slide to the wood substrate as it fell off during our shakedown cruise. I want to do this so the attachment is more secure than the few staples that were originally used. If I went in and screwed the molding in place with countersunk screws and a...

I couldn't find anything about this so posting here. I have gaps in the framing around my windows, not just the rubber, but the plastic frames. This has happened often on other rvs I have owned, so I must be searching the wrong terms... Anyway, silver tape does a good temp fix but I would like...

I bought a 2011 Zinger 5th wheel about 2 years ago. I didn't notice at the time that there was a small piece of rubber glazing missing at the top of the rear picture window. After experiencing minor dampness on the carpet below the window on extremely rainy days, I discovered the missing piece...

Vinyl moulding end cap & trough / gutter parts, have been searched but little answers, has anyone found some for the 1997 - 2000 Tropi-Cal 6350's ? Search results link: Exterior moulding end caps http://www.irv2.com/forums/f105/exterior-moulding-end-caps-239673.html Regards Marv

Finally found some time to work on it. In the last few weeks I got on all the lower belt molding, fabricated some covers where the A-frame enters the body, sealed and caulked all the belt moldings, and painted most of the lower wrap. I ran out of paint and it was threatening rain. Soon.

Anyone know where to find this type of trim? It goes around the window of my 1985 T-1350

Hello, wondering if anyone here has had scratches on their fiberglass? When they do patch up & repaint does it look like new again? Especially on the border of the slide out, the metal part. We just purchased a brand new 2014 Kodiak 300bhsl, it is the show model & they scratched the kitchen...

I have been looking at several Trailmanors recently to replace my pop-up trailer and noticed that in several of the trailers, most recently a 2007 2720SL, the trim does not match up well in the corners and the trim around the door has even shrunk. Is this normal?