lift kit

I bought this brand new camper 2025 Salem Hemisphere elite 36FL and have totally ripped the back septic piping out from under it and have lost the cover to to the back septic pipes 2 or 3 times because the ground clearance is so low. Has anyone ever put a lift kit under a camper this large. It...

Hello all. I recently ordered a new GD 310GK with the Morryde independent suspension. I'm using a 20k Reese Goosebox on the Rhino fifth wheel mount, which unfortunately provides for no vertical adjustments. My tow vehicle is a stock 2024 Chevy 2500HD with the tow package. With that...

We purchased a 2018 Escape 5.0 that we will tow with a 2024 Ford F150 4x4 (on order). Per Escape, any truck with the truck bed rails 56-58" requires the trailer to have a lift kit. Our truck will be at 56.5" so I am working on getting it lifted. Our local RV shop thinks the trailer is already...

Selling our 2022 Escape 21C. Asking $42,000. We are located in Casa Grande, AZ. Less than 7,500 miles on the trailer. We do have a loan on the trailer and will be happy to provide escrow service for peace of mind for both buyer and seller. See photo for Build Sheet. Things we added to the...

I just purchased a 2023 Rize 18A on a 2021 Ram chassis. The generator sits 6 inches from level ground and below the rear axle. I found that there was a Thor Technical Service Bulletin TSB 21-06 with instructions to use a Parts kit "TSB 21-06 Part Kit #0503506" containing rear axle shims and...

If you've ever driven one of these over a speed bump, pothole. or really any road imperfection, you know how low the clearance is on the Axis. I'm interested in reading folks experiences with lift kits. I've been looking at this one as a possibility: , a 4" lift kit from WeldTec Designs. Has...

It was recommended that I lift the tail end of the RV as the RV was starting to show signs of sagging in the rear. Measuring about a 4in difference from front to back from the ground to the chassis. Yesterday, I ordered a half suspension lift kit from SuperSteer at a reasonable cost including...

Just wondering if anyone has replaced their axle with a Flexiride axle? https://canadianaxle.com/ I had a boler with one and it was really handy for lifting the trailer. I just bought a 2006 17b and with the amount of fire roads this is going to see, I am definitely going to lift the trailer.

My truck: 2019 Tacoma / 38K miles / V6 / Tow package with tranny cooler / 4x4 / double cab / factory suspension / bought brand new TT: Haven't picked one out yet but am looking at two models that weigh c. 4.5Klbs dry weight with a hitch weight of c. 400lbs. I know the math & formula that goes...

I need to install the Dexter lift kit to provide more clearance to truck bed rails. It is necessary to raise the wheels 3" to add the lift. I will be jacking the trailer up on a level concrete floor. Can the rear stabilizing jacks handle the weight, if I use the front landing gear jacks to...

Hey for whatever reason you want to sell your Baja grocery getter kit im super interested. maybe this will help put you over the edge in to getting that 4x4 conversion!

Howdy, new owner of a 2012 154BH - looking to purchase the dexter over under axle flip kit. Unit is in storage and I need to purchase kit now before I head to the rv in a week. Any insight if the axle is 2 3/8" or 3" - dexter makes different size kits for different axle diameters. Dexter...

I have a 2014 Roadtrek 190P (2014 Chevy Express 3500). I'd like to lift it a couple inches to improve the ground clearance, and have read several lengthy threads here on this topic. I'm considering a 2" lift kit from Supreme Suspensions, similar to the ones from Weldtec Designs and Boulder...

Hey everybody, I'm all new and fresh in this forum and I need some help. Half a year ago I decided to save up to buy an E350 after finishing university and travel the world a bit (Until I run out of money = hopefully 3-4 years after I started my journey), before starting to work. Since than I...

TL;DR: WeldTec does great work, stands behind it, and is very communicative. The Baja Grocery Getter kit is phenomenal although I’m still struggling to find correct alignment. --- Back in December, I took my 2002 E-250 2x4 Sportsmobile down to El Cajon to visit WeldTec, where they installed...

First time post. I signed up membership here to download a CAD file I found from one of the threads pertaining to lifting a torsion axle camper. It was not for my axle... So, being the engineer that I am, knew it would have been too easy to download a CAD file and have a buddy machine the...

Decided to lift my 2007 213. I am not very good at documenting but I do have some after the fact photos and am super happy with the results. I will be taking a trip this weekend and will update any issues and or pros that I find. All I know is I am a fan of the Jayco it just severely needed...

i am about to run out of places to ask where i live. Sears, Big 10, even Walmart.. I need to raise the rear end of my GMC Savana 1500 by about 6". I am not sure if it sits low because of a problem or if that is just the way it sits. Bouncing it doesn't seem like the shocks are bad and it...

Sorry if this has already been covered, but I can't seem to find the answer in the existing posts. I have a 2008 2720 for which I need to buy new tires. I'm trying to decide whether or not to buy 14" tires as it currently has, or go ahead and move up to 15" tires now rather than later. But...

The Ford Generation 3 vans (1975-1991) are long overdue for some suspension upgrades. With not very many suspension upgrades available for these vans, we decided what the heck why not! Our goal is to put together a few options similar to what we have available for the GEN 4 series. We believe...

Has anyone done any super mods to equipt the tm more for offroad use besides the typical lift kit and 15 inch tires?What about offroad tires has anyone put those on? What about modding it slightly more to be more forest road friendly besides the obvious lift kit and 15 inch tires?

I just installed the lift kit on my trailmanor. All went well. It was a piece of cake and would have only taken me an hour "IF" the factory had paid a bit more attention to the hole spacing in the kit. One side was off by 1/4". I had to ream the hole out. besides that little detour of time, all...