Roof Air Conditioner Cover

Hello all,
I have been considering purchasing an air conditioner cover from Camping World. I have a 2005 2720SL with the low profile air conditioner unit. Before I go ahead and purchase the cover I would like to know if any one has bought one of these and did it fit correctly?

It can be seen at: http://www.campingworld.com/browse/s...21888&tab=spec

Thanks for any advice that may come my way.

Jerry

[commodor47]

Jerry,

I purchased a cover for our low profile Coleman (last summer). I will have to check on the manufacturer. The cover is a snug fit and does a good job at keeping debris out of the unit. You could probably return the cover if it ends up being too small. Measure the outside dimensions of the A/C unit (lenth, width, height) then check the dimensions for the cover.

Dick & Jeri,
Thank you for your reply.
Actually width may be ok, but the height and lenght look about 3 inches too long according to the Web site.
If you could find out the manufacturer of the cover you have I would be forever gratefull.
Thanks again,
Jerry

Originally Posted by commodor47

Jerry,

I purchased a cover for our low profile Coleman (last summer). I will have to check on the manufacturer. The cover is a snug fit and does a good job at keeping debris out of the unit. You could probably return the cover if it ends up being too small. Measure the outside dimensions of the A/C unit (lenth, width, height) then check the dimensions for the cover.

Here is what I got Dick:

[commodor47]

Jerry & Wendy,

Glad to see the cover fits okay. I assume there is a draw string that can be used to anchor the cover to the shroud. Your cover is definitely larger than mine. I was not able to locate the receipt for my cover -nor determine the manufacturer. I believe it may be similar to this one:

http://www.rvupgradestore.com/index....ROD&ProdID=701

Thanks for posting the photo of your cover.

Coleman Power Mach Series on my recent delivery. My model was a 9203C976

That's Polar Mach!