Testing New Brakes
I just replaced my brake assemblies with new Dexter Nev-r-adjust brakes. I am not sure I have the wiring installed correctly. I tried applying the brakes from the TV while the TM was still jacked up on one side and the brakes didn't seem to apply. I know the self-adjusting style brakes take some use to fully adjust so I tried to test the voltage to the brakes. I couldn't get a reading, but my brake controller (Tekonsha P3) shows about 11-14 amps being sent to the brakes.
If the brake controller shows the amps going to the brakes does that confirm the amperage or do I need to try again to use my meter at the brakes?
2017 Honda Ridgeline
2001 2720SL
|