Removable wooden valances

[HoMiPa]

As part of my complete remodel, I've been pondering all winter what to do about the curtains. Part of the reason that I thought about selling my TM and buying a Lance 1475 last Spring, was the things in the Lance that I really, really liked. So with that in mind, I finally came up with a solution for my TM windows.

I liked the idea in the Lance of the blackout shades, and the light diffusing shades. With the TM you have either curtains open, or curtains closed, which makes the TM darker than I would like, unless I actually wanted it darkened for some reason.

So, I have built wooden valances, that I will install Roman shades (for darkening) and gauze curtains (for light diffusion only).

The z-brackets I ordered finally came in, so this evening I mounted 4 of the valances that I started building on Sunday, and finished up on Tuesday. I am working on the blinds and curtains, but couldn't finish them until I had the valances mounted to be positive about the blind & curtain length. I hope to have pictures to post on Saturday of at least a couple of the windows with the blinds and curtains installed. I was sort of excited to show you the valances though, so until Saturday, just imagine blinds and curtains. :-)

I am writing a document of how I built the valances, and how I am making the Roman shades, and will post that when complete - I can't complete it until I have all the pictures to put into the document. I'll upload it as a PDF - hopefully on Saturday as well.

The valances are mounted with z-brackets, so will lift right off and store on the floor when my TM is closed. The way I am designing the shades & blinds, they will stay attached to the valances, but will be easily removed if needed. Please note that molding, etc is all still removed because of the remodel, and I haven't yet plugged the holes from removing all the old curtain rails & valances. So, here are the photos of the valances installed.

[Widedomain]

Nice... Looking forward to the write-up!

[HoMiPa]

I have one set of curtains and one blind done, and was anxious to see how they will look. Ignore the fact that I haven't worked in the ends on the crocheted valance or the crocheted edging on the curtains, nor have I ironed the blind or the curtains yet. Hopefully it will all look a little less of a hot mess once that has happened. Although, admittedly, I was aiming for a certain look when I selected gauze for the curtains. I may hate myself after sewing all of them, because it's a pain to sew......

Anyway, also ignore the fact that I have a tarp hanging down off the roof of the TM outside the window.....

It's going to take me forever to make all the blinds, sew all the curtains, crochet all the valances & trim.

The whole wooden valance, blinds, curtains, all remain intact and the whole thing just lifts off the wall for storage.

I should be able to post the document with instructions, etc tonight - too nice out to sit inside on the computer, so I'll finish that up tonight to post.

[HoMiPa]

I've attached the instructions I wrote for the removable wooden valances and the roman blinds.

Hopefully these will be of some use to someone! :-)

[Widedomain]

Thanks Holly! We have been looking for ideas...

[HoMiPa]

And I'm already changing things..... ha ha. Was at Wallyworld yesterday, and they had microfiber sheet sets on clearance. Gray & white chevron stripes - perfect for my colors! So, I bought several sets, and am ripping out the elastic & seams on the fitted ones as I type this. I am going to make the curtains out of the sheet fabric, and give up on the gauze idea. I do like the 'flow' of the gauze, but it's just too much of a pain to sew.... I'll post pics when I get at least one set made, and I am sure it will look better than the pictures I already posted.