Leaking faucet

mustang1b · 03-03-2017, 07:53 PM

2720SL 2007. I have a leaking shower hose connection where the hose joins the faucet fixture. Have gone through all paperwork on trailer and unable to find relative info. The area under the tube is no accessible. Can anyone tell me how to remove facet from tube? Or does the tub have to be removed? Will appreciate any info.

**Bill** · 03-03-2017, 08:01 PM

You cannot remove the tub without destroying it. Don't even try.

The shower hose is connected to the base with a short (1") sleeve. You should be able to unscrew this sleeve. Same as the hose connection in your house, if you have a shower hose.

In my 2006, there is a box mounted on the wall at the head of the tub. The base is mounted on this box. The box is about 2" deep by 10"x 14" (my TM is not available right now, so this is a rough guess). You can remove the box from the wall to gain access to the plumbing. It is caulked, so you will have to cut the caulk.

Other TMs have an access door, but you say that yours does not. Mine does not either

Bill

**Kidkraz** · 03-03-2017, 09:18 PM

Mustang, is your faucet like the one pictured here?

**Bill** · 03-04-2017, 08:11 AM

Aha! With the corner-mounted faucet assembly, you don't need the box I described. If this case, you should be able to remove the hose by simply unscrewing the fitting at the lower end of the hose. If the faucet assembly itself is broken, that is a bigger problem.

Bill

Shane826 · 03-04-2017, 08:37 AM

That's pretty slick with the faucet and shower! My 3326 is just the knobs and the hose for the shower. No separate faucet.

My 2007 3326 has an access hatch in the rear storage that (I've heard and I'm hoping) gives access to the plumbing for the shower faucet. Or you can try to pull the outside shower and see if that gets you access. Both of these are if you need to replace the shower assembly. The nipple on mine cracked, I'm replacing it in the spring. I hate cracked nipples. What a pain.

jleinbaugh · 03-07-2017, 11:22 AM

If you have the corner faucet then there is an access panel in the outside rear storage area. Remove the access panel and you unscrew the faucet from there. Trust me we know. We had to do the same this weekend. Replaced the inside tubes on the faucet that was leaking at the hose connect because we turned the outside water on without opening a faucet inside and the built up air busted the faucet tubing.

TM Pilot · 07-19-2017, 05:17 PM

Quote:

Originally Posted by Kidkraz

Mustang, is your faucet like the one pictured here?

Kidkraz,

I like that faucet you pictured. Where did you get it? Got a link?

Edit: Found this:

https://www.amazon.com/Dura-Faucet-D...+Hose+Diverter

https://www.walmart.com/ip/Dura-Fauc...rter/164921014

**Kidkraz** · 07-23-2017, 10:51 PM

TMPilot, it was the faucet that came with my rig. Not sure I still have it after replacing it. Both of the links looks like they would work.

TM Pilot · 07-30-2017, 03:27 PM

My shower faucet had a very slow leak (pump would cycle every 3-4 hours). So I replaced it. Easy plug and play. No issues.

Love this model and it's duel function over the stock faucet.