|
|
10-29-2014, 05:17 PM
|
#11
|
Guest
|
We have a 2014 GMC Acadia and I will need sway protection. We travel all over the USA. We just got back from a 4 week trip with a pop up. When I pulled a 33' travel trailer with my 3/4 ton truck I had a Hensley Arrow hitch it was the best. But for the Acadia it would kill it. I was reading about bull cams but know nothing about it. We have seen deadly crashes with RV's and we saw a very bad one in Texas. I do not want a cheap one just to get by with but one that will work when needed. This trailer is a 2007 3124KS and I am not sure I can pull it. My pop up was 3000 lbs and you never knew it was back there. Plus I will only go 65 MPH max that is it. Tires are not made for speed! I have to say I have gotten more information from this Owners page than anywhere! The Company is no help at all.
|
|
|
10-29-2014, 06:06 PM
|
#12
|
TrailManor Master
Join Date: Oct 2011
Location: New Braunfels, Texas
Posts: 919
|
With the rated 5200lbs capacity, you should be good. Just determine or weigh for tongue weight. Be informed, be safe.
RV
__________________
rvcycleguy
TM-2002 3124KB
TV-2003 Toyota Tundra V8 4.7L. Fact. Tow Pkg, air bags
2006 Suzuki Boulevard C50c Motorcycle- crashed- parted out
1956 Royal Enfield Bullet 500 Motorcycle-sold
2006 Harley Road King
|
|
|
10-29-2014, 06:14 PM
|
#13
|
Guest
|
Not to question the poster, but am I the only one who thinks a class five receiver on an Acadia is a bit strange?
There is a tag on the receiver that states the receiver capacity with and without a WDH, or in some cases that a WDH is not recommended. Along with vehicle tow capacity etc. already discussed, this should be another factor in the decision process.
|
|
|
10-29-2014, 06:22 PM
|
#14
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,104
|
Campersam -
I'm not quite sure where you are going with some of this, so let me throw out some comments. Take them for what they are worth.
The Acadia is rated to tow 5200 pounds "when properly equipped". This should be sufficient, but not generous, for towing any TM. You will find it to be marginal but do-able in steep high altitude terrain such as the Rockies or high Sierras.
The term "when properly equipped" means different things to different manufacturers. It certainly means a weight distributing hitch, a 7-wire electrical harness and connector, and an electric brake controller. It usually means an auxiliary transmission cooler (in addition to the standard transmission cooler), sometimes an engine oil cooler, a heavy-duty engine cooling system, sometimes a specific rear-end ratio, and sometimes a special suspension package. The manufacturers don't like to lay out these details, and usually hide them behind an asterisk in the specs list. But if you hunt long enough, you can find them. And you should. Apparently the Acadia meets these needs if you buy the optional V92 towing package.
The Acadia's tow rating is not based on the new towing standard, SAE J-207. Vehicle manufacturers are gradually (and reluctantly) adopting the standard, and GMC's pickups are rated according to the standard. I'm sure the Acadia will be a year or two - but not yet.
I don't think you really mean a Class 5 hitch. That is a monster, and it won't fit your vehicle. You need a Class III or Class III/IV hitch. Some Class IIIs are rated at 3500 pounds, some higher, so choose carefully.
You probably do not need sway control. TMs are specifically built not to sway - that's why a TM has such a high hitch weight. I don't know more than one or two people who use anti-sway - but of course anti-sway will do no harm. You might read the sway control tutorial in the TM technical library (first forum in the list).
The Hensley Arrow is a wonderful hitch. But very expensive, and by most accounts much heavier than a more common chain-lift hitch (which is very heavy to start with). Don't forget that this weight increases the tongue weight that your vehicle has to carry. Most, but not all, TM owners use a standard chain-lift WDH from Reese, Curt, Draw-Tite, Hidden Hitch, or a number of manufacturers who all seem to make similar hitches.
I have no idea what a bull cam is.
Keep the questions coming. The members of TMO have an enormous amount of collective experience.
Bill
|
|
|
10-29-2014, 06:41 PM
|
#15
|
Guest
|
It is a class 3/5 and I had an easy time putting the hitch on.
|
|
|
10-29-2014, 07:05 PM
|
#16
|
TrailManor Master
Join Date: Apr 2014
Location: Orlando
Posts: 2,796
|
Just an aside but the Class IV hitch on my GC is higher than most add-ons because it fits into and is in line with the "frame rails" (monocoque channels). A few years ago I was rearended by a F-150 that folded its front end around my receiver and deployed both air bags. My tailgate was dented but still sealed , worked properly, and the vehicle drove straight. The F*rd had to be towed.
I am a great believer in factory towing packages and really takes a build sheet to see all of the changes. Do know that my trans rarely reaches 180F even when towing on a hot day because can read on the dash. Staying in lockup makes a real difference.
__________________
Looking for a 24/17 in or near Florida.
|
|
|
10-29-2014, 07:23 PM
|
#17
|
TrailManor Master
Join Date: Sep 2010
Location: Jo-juh
Posts: 420
|
Quote:
Originally Posted by MisterP
Not to question the poster, but am I the only one who thinks a class five receiver on an Acadia is a bit strange?
|
Yes, I question.
__________________
Mark
'20 Ford F250 Lariat 6.7 L 4WD (Herschel)
'22 Keystone Cougar 32BHS 5er (Mellencamper)
'01 Ford Excursion Limited 7.3 L PSD 4WD (Rudolph) (Sold)
'18 Keystone Cougar 29BHS (Sold)
'15 Prime Tracer 25BHS (Traded)
'06 TrailManor 2619 (Traded)
:cwmddd:
|
|
|
10-30-2014, 07:56 AM
|
#18
|
TrailManor Master
Join Date: Apr 2014
Location: Orlando
Posts: 2,796
|
Naw, a fifth wheel in an Acadia would be strange. Finding a 2" ball/adapter for a 2.5" receiver would just be hard. Maybe it was used for GMC commercials.
__________________
Looking for a 24/17 in or near Florida.
|
|
|
10-30-2014, 09:48 AM
|
#19
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,104
|
Quote:
Originally Posted by campersam9
It is a class 3/5 and I had an easy time putting the hitch on.
|
I've never heard of a Class 3/5 hitch. Can you tell me who makes it? How big is the shank (the solid steel piece that goes into the hitch recever on your vehicle)? A Class 3 hitch has a 2 x 2 shank. A Class 5 hitch has a 2 1/2 X 2 1/2 shank. Perhaps there is an adapter of some kind?
I try to learn something every day.
Bill
|
|
|
10-30-2014, 05:49 PM
|
#20
|
Guest
|
Yes you are correct! I purchased a Curt MFG # 13424 and it is a class 3 hitch. Last night I had some pain killers due to my health problem. I am sorry for the miss on the hitch. But I have to say it was easy to install on the car. It is hidden and it worked very well. I purchased everything from Curt I do not like mix and match.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|