Maintenance: lubrication points
I don't recall seeing any overall maintenance schedule regarding lubrication. If some one were to put one together, I've got a couple of suggestions:
1) Torsion bar adjusters (antiseize).
2) Torsion bar to the hole-thingy bracket that's mounted to the lower edge of the box section) (lithium grease)
3) Latch (the one in the centre, not corners) (lithium grease)
4) Guide pins that follow a track for the slide models (sofa or dinette slides) (lithium grease)
5) Corner stabilizers (As I recall, Bill likes a dry teflon spray so that it doesn't attract dirt).
Any other suggestions?
BTW, my rear shell was getting "sticky" to lift. Part of the reason was it needed adjustment as it was binding, but as soon as I applied the lithium grease if moved a lot easier.
|