Wheel has slight drag
I replaced the 11 year old tires not a moment too soon. There was a slight bulge and crack developing on the sidewall.
Put on new ST225/75R15 GoodYear Endurance 10 Ply with a max load capability of 80 PSI. We filled to 65 PSI.
Got the hubs greased. Grease nozzle fit the zerk pretty loosely but grease seemed to go in pretty well. Had a hard time taking grease nozzle off when done. Anyone else experience this?
But the right wheel has a slight drag in one spot when we spin it when jacked up. Am wondering if the brake or bearings could be the problem. Or something else?
Suggestions?
__________________
3023 owner
|
Threaded Mode
