Flex hose support

I'm wondering what most folks that camp with sewer connections use to support their flex hose.
When I had my Minni Winnie, I had a support made from 4 inch pvc pipe ,but I left it go with the camper and I don't remember how it was made.
A friend showed me his set up yesterday.
I got some pipe and made one today.
1/2 inch pipe and tees, 3/4 inch pipe and tees, one length of 4 inch sewer pipe and 4 hairpin clips. takes about 1 hour.
The first picture is my friends setup in use yesterday and the next three are of the one I just built.

[TrailManorMan]

Looks like a nice set up, where will you store it when traveling?

[Lesherp]

When I made my sewer hose storage system from vinyl fence post I used vinyl rain gutter for the pull out. I don’t remember the length the rain gutter came in but I had a substantial length of leftover that I just put under the pull out so I ended up with two lengths if I ever need them. I have only use it once but I just bungeed one end to the trailer and ran the other out to where it needed to go. It was ridged enough not to need support. I usually bring along some small lengths of 2X4 that have come in handy a number of times. If I ever needed to use both lengths of rain gutter I would probably need them for support. I have pics of this modification in my albums.

[davlin]

Stores really small, and works really well. http://www.amazon.com/Camco-43041-Si.../dp/B0006IX7Y2

Dave

Originally Posted by TrailManorMan

Looks like a nice set up, where will you store it when traveling?

The ells that are close together at the bottom of the units aren't glued so when you want to put them away it all folds down. I store them in the old sewer hose storage in the back bumper. I have a fence post for the actual hose so I don't need that space anymore.