TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Technical Discussions > Frame
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 04-03-2022, 11:44 AM   #1
Larryjb
Site Sponsor
 
Join Date: Nov 2016
Location: Vancouver BC
Posts: 1,518
Default Old style box-shaped wheel well to newer style

Those of us who have the old style box-shaped wheel well should seriously consider rounding the wheel well because a blowout can cause much more damage to the box-shaped well. There is a method described here in the technical library about how to convert it to the rounded wheel well:

https://www.trailmanorowners.com/for...ighlight=wheel

I was looking at one of my old pictures and wondered about the possibility of completely removing and replacing the old style wheel well with the new style ordered from Trailmanor. It's likely more complicated that I am assuming for now, but it looks as if there are just a few rivets that could be drilled out to remove the box shaped wheel well, then rivet in the new rounded wheel well.

This would certainly be a more expensive way to go, but if it just involves drilling out a few rivets and rivetting in a new one, this method might make the job easier for some.

This is just a thought. No more than that. But this is how innovation happens.



https://www.trailmanorowners.com/for...pictureid=1890
__________________
Larry

2002 Tahoe
2008 4.6 Explorer
2001 2720SD

Various TM images that you may or may not find elsewhere:
http://www.trailmanorowners.com/forum/album.php?u=11700
Larryjb is offline   Reply With Quote
Old 04-03-2022, 04:49 PM   #2
Wavery
TrailManor Master
 
Wavery's Avatar
 
Join Date: Jan 2022
Location: San Diego, California
Posts: 2,824
Default

Quote:
Originally Posted by Larryjb View Post
Those of us who have the old style box-shaped wheel well should seriously consider rounding the wheel well because a blowout can cause much more damage to the box-shaped well. There is a method described here in the technical library about how to convert it to the rounded wheel well:

https://www.trailmanorowners.com/for...ighlight=wheel

I was looking at one of my old pictures and wondered about the possibility of completely removing and replacing the old style wheel well with the new style ordered from Trailmanor. It's likely more complicated that I am assuming for now, but it looks as if there are just a few rivets that could be drilled out to remove the box shaped wheel well, then rivet in the new rounded wheel well.

This would certainly be a more expensive way to go, but if it just involves drilling out a few rivets and rivetting in a new one, this method might make the job easier for some.

This is just a thought. No more than that. But this is how innovation happens.



https://www.trailmanorowners.com/for...pictureid=1890
Why not just use sheet metal?

If you use a much longer piece on the driver's side you could continue it back to cover the plumbing (with some bracing of course).
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
Wavery is online now   Reply With Quote
Old 04-03-2022, 07:39 PM   #3
Larryjb
Site Sponsor
 
Join Date: Nov 2016
Location: Vancouver BC
Posts: 1,518
Default

Quote:
Originally Posted by Wavery View Post
Why not just use sheet metal?

If you use a much longer piece on the driver's side you could continue it back to cover the plumbing (with some bracing of course).
The sheet metal is the current method used (see links). I was just suggesting a possible alternative method that could be used if some one was not comfortable cutting and shaping sheet metal. It's probably not really worth considering, it was just a thought that came to mind.
__________________
Larry

2002 Tahoe
2008 4.6 Explorer
2001 2720SD

Various TM images that you may or may not find elsewhere:
http://www.trailmanorowners.com/forum/album.php?u=11700
Larryjb is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DayTripper Charging and Battery Box flexibility Peterbug Electrical 1 08-11-2019 12:08 PM
Why is my wheel not centered in the wheel well? ShrimpBurrito Frame 16 12-20-2007 08:10 AM
"Heavy Duty Wheel Lock" (was previously "security of your Trailmanor") rickst29 General Maintenance and Cleaning 16 06-10-2007 10:04 PM
Wheel Wells and Tire Failure hal General Maintenance and Cleaning 34 08-19-2002 01:12 PM


All times are GMT -6. The time now is 05:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.