leveling and faulty jack
Hi all,
I have a 2003 2720 which has 4 of the Le-Sure lift levelers on it. I have read some previous posts where folks suggest to level left to right using blocks, and then front to back with the tongue jack. I'm not very clear as to how one would level with blocks as it doesn't seem possible to roll the entire back up onto a 4 x 4 inch block in cases where the site is fairly unlevel. I have always used the tongue jack to level front to back but always used the side jacks for leveling side to side. I am wondering if it was this kind of pressure on the jack that has caused one of the jacks to "slip" now when I try to crank it under the weight of the trailer when attempting to level from side to side. Any clarification on the side to side leveling with blocks would be greatly appreciated. I am wondering if there is a warranty on those jacks? I have taken it off of the trailer at this point and I'm wondering if it is repairable at an RV service center or something. The jack will still support the weight of the trailer, it just slips when trying to use it to raise/balance the trailer. Thanks in advance for the responses. They are always extremely helpful.
Thanks,
-Brian
|