Removing TM fridge pics

[Wavery]

I thought that some may benefit by some pics of the removal of the TM fridge. When we look at the back of the fridge compartment, it looks pretty intimidating because of all of the wires all over. Most of those wires have nothing to do with the fridge.

Take off the fridge door and remove 6 screws from the fridge to the cabinet and the fridge pulls right out. Pull it out far enough to unplug the 110V power cord and 12V connections from the outside. Then you can pull the fridge into the living area and easily unscrew the gas line from inside. There is plenty of flexible copper tubing to pull the fridge all the way out.

There are 2, 12V wires that just pull off of the connectors on the bottom of the fridge. The gas line takes a 3/4" wrench for the flare fitting and a 5/8" wrench to hold the fitting that screws into the valve. The 110V cord simply unplugs from an outlet fixed to the back wall.

I think the pics are self explanatory but if anyone has any questions, ask away.

By the way...... the only thing holding the radio into the cabinet (pic #8) is about 6 little metal tabs that poke out from the radio chassis. Push those tabs back into the chassis and simply slide the radio out of the hole forward.

This removal is pretty straight forward and takes under an hour.