2013 2720 SD: Gap Between Slide and Body Wall

[lcastell]

Hello,

Our new to us 2720 SD has a gap between the slide out wall on the right hand side and the main body of the camper. It looks like the wall angles out and the upper shell splays out as well.

The camper is level.

Any thoughts on how to fix this?

I'm attaching two pictures of the right hand side and one of the left hand side for comparison.

Update:

After posting this question, I saw a similar thread from about a year ago. Following the excellent suggestions in it, I went out and checked everything with a level.

The slide out side wall is reasonably vertical with both the lift arm and main body side wall angled out. As the lift arm is straight, I'm assuming the torsion bar is the issue.

Any thoughts on how to fix this? A new torsion bar? Bend the torsion bar somehow? Neither sounds like much fun OR just stuff the gap with something when camping?

(Note, the title says 2720 DL and it should be 2720 SD, not sure how to fix it on this forum software.)