TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Technical Discussions > Towing and Hitching
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 10-11-2024, 01:17 PM   #1
jdmackes
Member
 
Join Date: Jun 2024
Posts: 22
Default Powered Trailer Dolly

I wanted to give a little review for a trailer dolly that I picked up to help make it easier to manuver my TM in and out of the garage. I picked up the Vevor 5000 lbs trailer dolly and it's honestly been pretty great. I was able to get the TM out of the garage and back it up into my driveway without issue, and it was FAR easier than using the harbor freight one I had before.

I've only had it for a few weeks now, but so far it's been great. It's not water proof so I just take it off when I'm not going to be using it. It's also really only made for paved surfaces, so I don't think it would work well on rocks or grass. Also, the bracket that holds the unit to the trailer seemed to not be bent correctly on mine, which made it really difficult to initially connect the unit. If I had a vice I would have just bent it in that, but I don't have one at the moment.

I think for the price (it was $210 when I got it, I think it's like $255 now) it's pretty good and certainly capable of moving my 2720. I do keep it down as low as possible so that the connection to the trailer is as close as possible to the powered wheel. That way there should be less swaying from the motor kicking in.
jdmackes is online now   Reply With Quote
Old 10-11-2024, 10:49 PM   #2
Kidkraz
Site Sponsor
 
Kidkraz's Avatar
 
Join Date: Mar 2013
Posts: 1,086
Default

Interest info. How steep of an incline is your driveway?
__________________
2013 2619
80 watt solar panel/swing hitch/low profile A/C.
Enduro 4445 caravan mover
2016 Dodge Ram 1500 V8 Hemi
Installed powered folding tow mirrors

Stopped playing with airplanes, now I just enjoy watching them fly by.
Kidkraz is online now   Reply With Quote
Old 10-12-2024, 04:57 PM   #3
jdmackes
Member
 
Join Date: Jun 2024
Posts: 22
Default

It's a decent incline, but I believe the instructions on this say it shouldn't go more than either 5 or 10 percent incline. I only really use it to do the fine maneuvers in and out of my garage, but it works great for that.
jdmackes is online now   Reply With Quote
Old 10-13-2024, 08:31 AM   #4
Bill
Site Team
 
Bill's Avatar
 
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,212
Default Another trailer dolly

JDMackes -

I like your solution. If I had spotted it earlier, I might have gone that way. Instead, last spring I bought a Vevor QYC1500 trailer mover, to move my boat trailer around on an unpaved surface. It is a manual mover - not powered - and it is a moose! The ground where I use it (second pic) is slightly sloped, the surface is crushed rock (aka "crusher dust") mixed with coarse sand, a few small rocks, and tufts of coarse grass. This surface completely defeated an earlier lighter-weight manual mover, and I had to put down sheets of plywood to roll it on. With the Vevor, I can move it around easily on this surface, in any area where the slope isn't too great.

Things I liked about it?
o It has an enormous weight rating - 1500 pounds trailer tongue weight.
o It has three wheels - two BIG 16" pneumatic tires that roll right over the small rocks that blocked the lighter mover with 6" wheels, plus a third rear wheel so the thing can't tip under load.
o The load-bearing wheels are wide-spaced, making it very stable even on side slopes.
o It comes with a 2" hitch ball that mates directly with your trailer's hitch. Ball height is easily adjustable over wide range, by pulling a pin.
o Because the hitch ball can be high off the ground, the mover can be pivoted almost 360 degrees without hanging up on the underside of the trailer's A-frame. My previous mover would swing only about 60 degrees in each direction, which is too little to make a tight turn.
o THE BIG ITEM? Like any manual mover, it has a T-handle on the end of the tow arm, so you can grab it and tug it around by hand. But the T-handle can be removed, and a real trailer hitch (included) installed in its place. This means that you can do a fine tweak of the starting position manually, then use your car/truck to do big movements across the yard or up a slope, and then do final positioning by hand. This is especially useful when I use the truck to move the trailer until the wheels are on the smooth level floor, then inch it into final position by hand.

Vevor actually makes three versions of this mover. One has a hitch weigh rating of 500 pounds (too small), one is rated at 1000 pounds, and the one I bought is rated at 1500 pounds. Only the 1500-pound version has the trailer hitch option. The price difference is small, so I went with that. It is available from Amazon, Home Depot, Tractor Supply, etc. The list price appears to be about $160, but I caught a sale at Amazon and got it for $120 with free shipping.

Bill

https://images.thdstatic.com/catalog...6c22a33d39.pdf
Attached Thumbnails
Click image for larger version

Name:	Vevor mover pic.jpg
Views:	29
Size:	43.3 KB
ID:	23580   Click image for larger version

Name:	Assembled view small.jpg
Views:	32
Size:	1.03 MB
ID:	23581  
__________________
2020 2720QS (aka 2720SL)
2014 Ford F-150 4WD 5.0L
Bill's Tech Stuff album
Bill is offline   Reply With Quote
Old 10-13-2024, 09:53 PM   #5
Wavery
TrailManor Master
 
Wavery's Avatar
 
Join Date: Jan 2022
Location: San Diego, California
Posts: 2,942
Default

Quote:
Originally Posted by jdmackes View Post
I wanted to give a little review for a trailer dolly that I picked up to help make it easier to manuver my TM in and out of the garage. I picked up the Vevor 5000 lbs trailer dolly and it's honestly been pretty great. I was able to get the TM out of the garage and back it up into my driveway without issue, and it was FAR easier than using the harbor freight one I had before.

I've only had it for a few weeks now, but so far it's been great. It's not water proof so I just take it off when I'm not going to be using it. It's also really only made for paved surfaces, so I don't think it would work well on rocks or grass. Also, the bracket that holds the unit to the trailer seemed to not be bent correctly on mine, which made it really difficult to initially connect the unit. If I had a vice I would have just bent it in that, but I don't have one at the moment.

I think for the price (it was $210 when I got it, I think it's like $255 now) it's pretty good and certainly capable of moving my 2720. I do keep it down as low as possible so that the connection to the trailer is as close as possible to the powered wheel. That way there should be less swaying from the motor kicking in.
I've had one of those [Vevor powered dollies] for years. At first, I didn't like how wobbly it was so I made a modification. It makes it very sturdy. It uses a 1 7/8" muffler clamp. A 1 3/4" will not work. It will still be wobbly.

This picture is it mounted on my 20', 5,000# cargo trailer. It moves the trailer with ease.
Attached Thumbnails
Click image for larger version

Name:	Dolly a.jpg
Views:	58
Size:	293.0 KB
ID:	23582  
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
Wavery is online now   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Still looking for a power mover / trailer dolly Bill Parts and Accessories Wanted 10 07-25-2023 07:02 PM
Powered trailer dolly Bill Towing and Hitching 12 09-27-2022 03:35 PM
PowerMover AC Trailer Dolly Shandysplace General TrailManor Topics 25 07-10-2012 10:09 PM
Things to consider about your tow vehicle when looking into a Trailer Purchase Nature Recorder Prospective Owner Questions 36 07-07-2009 11:49 PM
Trailer sway and sway control RockyMtnRay TrailManor Technical Library 0 04-02-2005 09:34 PM


All times are GMT -6. The time now is 02:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.