TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Technical Discussions > Electrical
Register FAQ Members List Calendar

Reply
 
Thread Tools Display Modes
Old 07-28-2021, 11:37 AM   #1
JSShattuck
Member
 
Join Date: Jul 2021
Location: Middleburg, FL
Posts: 9
Default suggestions for replacing converter, please

I am no electrician, but think I need to replace the converter in my 2007 3124KS. Everything worked while camping last summer, but has stopped since being stored.
The battery does not remain charged up, even when plugged into shore power. At first I thought it could be the battery, so I replaced it.
The indicator lights are not all lit while connected to shore power. When the battery is depleted the interior lights do not work, even while connected to shore power.
So I was wondering what converter anyone recommends for replacement. I did not find a model # on the existing. I will try to post a couple pictures of what I have.
Thanks in advance for your help.

Click image for larger version

Name:	RV converter 1.JPG
Views:	59
Size:	2.44 MB
ID:	20138

Click image for larger version

Name:	RV converter 2.JPG
Views:	43
Size:	1.95 MB
ID:	20139
JSShattuck is offline   Reply With Quote
Old 07-28-2021, 12:05 PM   #2
Bill
Site Team
 
Bill's Avatar
 
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,105
Default

I don't recognize the particular converter - perhaps someone else does.

Before replacing, the problem sounds like of two simple things. First, is the converter getting AC power? One of the circuit breakers should be labelled "Converter". Flip that breaker OFF, then ON.

Second, there is probably a 12-volt output fuse somewhere within the converter. You need to find that fuse and check it.

Do you have the blue book that came with the TM? If so, the converter manuals will be in the book. Otherwise, you will need to identify the converter, and get the manual on line.

Bill
__________________
2020 2720QS (aka 2720SL)
2014 Ford F-150 4WD 5.0L
Bill's Tech Stuff album
Bill is offline   Reply With Quote
Old 07-28-2021, 07:11 PM   #3
JSShattuck
Member
 
Join Date: Jul 2021
Location: Middleburg, FL
Posts: 9
Default Thanks

Thanks for the reply. I have switched all the breakers off/on. I have a blue folder, I'll look in that for the converter info. I will also look for the 12V fuse.
JSShattuck is offline   Reply With Quote
Old 07-31-2021, 02:57 PM   #4
JSShattuck
Member
 
Join Date: Jul 2021
Location: Middleburg, FL
Posts: 9
Default follow up

I think the 12V circuit breaker you refer to would be the Pollak 54-230P in line near the battery. That was the first thing I replaced.
I found the manual for the converter. It is WFCO Ultra WF-8935AN/WF-8945AN/WF-8955AN. I don't know how to determine if it's 35, 45 or 55. The manual does give trouble shooting information though.
To be continued....
JSShattuck is offline   Reply With Quote
Old 07-31-2021, 04:10 PM   #5
Bill
Site Team
 
Bill's Avatar
 
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,105
Default

The Pollack circuit breaker in the battery positive line is not original, but is a better-than-original installation done by a former owner. It replaced the original 30-amp main fuse, which was somewhat troublesome.

Bill
__________________
2020 2720QS (aka 2720SL)
2014 Ford F-150 4WD 5.0L
Bill's Tech Stuff album
Bill is offline   Reply With Quote
Old 07-31-2021, 05:12 PM   #6
Casey Freswick
Senior Member
 
Join Date: Sep 2016
Location: Grand Rapids, MI
Posts: 204
Default new converter

I know this thread is straying from the original post somewhat but I would recommend that anyone getting a new converter get one that can switch to a lithium battery. This upgrade is not much more and it will increase your options in the future.
__________________
Casey. TM:2006 2720SL TV: 2014 Yukon 300 Watt Solar, 300 Amp lithium, 3K Inverter
[SIGPIC][/SIGPIC]
Casey Freswick is offline   Reply With Quote
Old 02-16-2022, 02:32 PM   #7
JSShattuck
Member
 
Join Date: Jul 2021
Location: Middleburg, FL
Posts: 9
Default

I replaced the converter with a new WFCO WF-8945-MBA. That solved my problem.
JSShattuck is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Converter Issue Brifla Electrical 11 12-13-2012 09:42 AM
Power Converter Upgrade mjlaupp Electrical 33 02-08-2011 08:16 PM
Splitting Converter onto own circuit grakin Electrical 0 09-28-2008 04:29 PM
Converter Replacement with PD 9260C KSBASS Electrical 12 10-08-2007 05:09 AM
Converter/ batt. issues again? Scott Q General TrailManor Topics 12 07-02-2006 09:32 PM


All times are GMT -6. The time now is 04:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.