TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Owners Community > Prospective Owner Questions
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 06-06-2010, 05:05 PM   #21
Bill
Site Team
 
Bill's Avatar
 
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,088
Default

Quote:
I lift the front on the corner jacks, retract the wheel so it's off the ground, swing away, and then lower the wheel to roll the TM the last few feet into position in the garage.
Perhaps I am misunderstanding, but I seem to hear you say that you put the full tongue weight of the TM on the wheel while the swing tongue is swung to the side. This is not a good idea, since the torsional rigidity of the A-frame and swing mechanism is compromised when you pull out the big pin, and apply a torque from the side. We had a big discussion of this a few years ago, in the context of broken frame welds in the swing tongue area. I found it in this thread

http://www.trailmanorowners.com/foru...ead.php?t=3728

as well as an earlier thread which is referenced therein.

Bill
__________________
2020 2720QS (aka 2720SL)
2014 Ford F-150 4WD 5.0L
Bill's Tech Stuff album
Bill is offline   Reply With Quote
Old 06-06-2010, 09:18 PM   #22
ThePair
TrailManor Master
 
Join Date: Nov 2008
Location: Chicago, IL
Posts: 1,063
Default

You are not misunderstanding. That is exactly what I do, and it's something that I had discussed with both the dealer and someone at the factory prior to purchasing the TM. I do not swing with any weight on the front, but once swung to the side, I do roll the TM in the last 18" or so, then remove all weight.

I will call the factory this week to reconfirm. I have a feeling that they redesigned things with the swing tongue since that thread, but I will reconfirm and post here. The last thing I want to be doing is something that could potentially damage the tongue!
__________________
2009.5 2720SL
2006 Toyota Sienna
2018 Audi Q7
ThePair is offline   Reply With Quote
Old 06-07-2010, 02:30 PM   #23
ThePair
TrailManor Master
 
Join Date: Nov 2008
Location: Chicago, IL
Posts: 1,063
Default

Ok, just got off the phone with Mike from TM. He said that they have made some small modifications to the swing hitch over the last few years, but the purpose of those was to prevent the types of hitch damage seen in the aforementioned thread. As a result, he said that, as long as the TM was closed, and the ground was smooth without risk of a sudden drop or other sudden stress, then it should be absolutely fine to do what I'm doing. Seeing as I'm inside my garage (perfectly smooth floor) with the closed TM, it seems like I'm safe.

Obviously, this is something that can only be done in limited and set circumstances, but my set up seems to be one that allows for this.
__________________
2009.5 2720SL
2006 Toyota Sienna
2018 Audi Q7
ThePair is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.