Entrance Door Problem

Hi,

For you new TM owners and old timers, here is how I solved my entrance door problem last year. I had to move the jam bracket over 1/8 of an inch as shown in the picture. The top was not the same as the bottom. (in the picture on the left of the jam) I guess it came from the factory like that?

The door never closed properly, I tried all kind of tricks from this forum, but I remove 5 screws and moved the top over just a little.

This might not be your problem, but it sure solved my door problem, I blow on the door now and it shuts just perfect...

Hope this helps, Happy camping this season. PLEASE BE SAFE, AND HAVE FUN

Dave

[MarkoPolo]

Dave,
Which way did you move the jamb? To the inside of the trailer? Or was a top to bottom misalignment?
Mark

Originally Posted by MarkoPolo

Dave,
Which way did you move the jamb? To the inside of the trailer? Or was a top to bottom misalignment?
Mark

I moved the top over towards the street side so it was the same as the bottom. How I ever notice that is beyond me. The door catches very nice now without pushing & pulling.

Dave

Thanks for the info...next trip I'll have to check how the top & bottom halves of my door line up