Covering our 2720SL in the open configuration

[Cateye]

These are pictures of the ADCO cover (PN 228432) we purchased from Camping World (PN 27903) to cover our 2720SL in an open configuration. The Tyvek top option (white) with polypropolene sides (grey) was chosen since we have very intense sunlight in this part of Colorado. In fact the reason we decided to cover our TM was due to the yellowing of the trim parts and failure of plastic parts on the side facing South. It turned out to be a fairly close fit. the ends are designed to be tied so as to constrict and tighten the cover. You may note that the door side has 4 zippered panels to allow access to the door when covered. This is a very handy feature since we store our summer toys inside during the winter months. Since it is not uncommon to experience winds in excess of 55 mph during thunderstorms and the passage of cold fronts, we added the two extra bungie tie downs aroung the trailer. We'll see how it does in these winds. We left the vent open a couple of inches along with the windows in the ends of the trailer open to facilitate ventillation.