Side Shell Gap

[Steppy]

There is a about a 2 inch gap between the curbside front and rear shells when closed and about a half inch gap between them when opened. Any thoughts on how I can eliminate said gap? There is no gap on the driver side.
__________________

[Jshepardson]

You ever figure this out? Mine does the same thing. I have also noticed when the body of the camper is perfectly level and the shells when opened leans towards that passenger side. I bet the shells need adjusting somehow or another. I was actually surfing for that adjustment post when I found yours. That lean is also causing an issue with my door.

[Shane826]

MAYBE the shell heights are out of whack? You can level the shell height by adjusting the lift arms on the torsion bars. If the 4 arms aren’t adjusttled to the same height it causes the shells to flex and do odd things.

But my suspicion is you may have one or more bent torsion bars...