TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Technical Discussions > Exterior
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 04-27-2022, 06:44 PM   #1
Rad7661
2007 3124Ks
 
Rad7661's Avatar
 
Join Date: Nov 2021
Location: Ellenwood GA.
Posts: 14
Default Trim help needed

Hello TM family can someone please help me with a name and part number for these corner trim guards so I can get replacements. I lost one traveling, noticed one waving at me on the way so I removed it and the other 2 are cracked and loose. Thanks in advance.
Attached Thumbnails
Click image for larger version

Name:	20220427_203131.jpg
Views:	55
Size:	3.30 MB
ID:	20782  
Rad7661 is offline   Reply With Quote
Old 04-28-2022, 05:08 AM   #2
Shane826
TrailManor Master
 
Shane826's Avatar
 
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,818
Default

Front Trim Door Side p/n 10201
Front Trim Off-Door Side p/n 10202
Rear Trim Door Side p/n 10203
Rear Trim Off-Door Side p/n 10200

When I bought the front pieces a few years ago they were ~$55 each. Shipping wasn’t cheap because of the size, I think it was like $35. So buy them all at once because shipping was expensive due to size and not weight. I’m pretty sure they are only available in black now. Note it’s planting season for the Upland Colony so they might be a bit hard to get ahold of right now, Adam has been helping on the shop floor.

TrailManor Parts
(605) 239-4002
[email protected]
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
Shane826 is online now   Reply With Quote
Old 04-28-2022, 08:28 AM   #3
Rad7661
2007 3124Ks
 
Rad7661's Avatar
 
Join Date: Nov 2021
Location: Ellenwood GA.
Posts: 14
Default

Thanks Shane I appreciate the help and will make the order all inclusive to save on shipping.
Rad7661 is offline   Reply With Quote
Old 04-28-2022, 03:30 PM   #4
Shane826
TrailManor Master
 
Shane826's Avatar
 
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,818
Default

Cool beans. Here’s the link to the catalog if you’d like to check it out. It’s a bit dated and there’s no pricing but it makes it a lot easier if you’re talking the same language when ordering parts.

https://trailmanor.com/wp-content/up...atalog2018.pdf
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
Shane826 is online now   Reply With Quote
Old 04-28-2022, 04:30 PM   #5
Rad7661
2007 3124Ks
 
Rad7661's Avatar
 
Join Date: Nov 2021
Location: Ellenwood GA.
Posts: 14
Default

Thanks I have the catalog but wasn't sure of the parts names. And yes it does make things a lot easier knowing the proper name and part number.
Rad7661 is offline   Reply With Quote
Old 05-01-2022, 01:26 PM   #6
DEKirk
Member
 
Join Date: Oct 2020
Posts: 5
Default

I just purchased one of the corners to replace, what is the best sealant/glue to hold this to the aluminum body?
DEKirk is offline   Reply With Quote
Old 05-01-2022, 02:02 PM   #7
Rad7661
2007 3124Ks
 
Rad7661's Avatar
 
Join Date: Nov 2021
Location: Ellenwood GA.
Posts: 14
Default

I can't say what's best but I'll be using 1 inch 3m double sided tape to secure mine. Then a bead of latex caulk on the edge. This should give me a strong weather tight bond and seal with easy removal and reinstallation if ever necessary.
Rad7661 is offline   Reply With Quote
Old 06-10-2022, 07:32 AM   #8
biqut2
New Member
 
Join Date: Jun 2022
Posts: 1
Default

Quote:
Originally Posted by Shane826 View Post
Front Trim Door Side p/n 10201
Front Trim Off-Door Side p/n 10202
Rear Trim Door Side p/n 10203
Rear Trim Off-Door Side p/n 10200

When I bought the front pieces a few years ago they were ~$55 each. Shipping wasn’t cheap because of the size, I think it was like $35. So buy them all at once because shipping was expensive due to size and not weight. I’m pretty sure they are only available in black now. Note it’s planting season for the Upland Colony so they might be a bit hard to get ahold of right now, Adam has been helping on the shop floor.

TrailManor Parts
(605) 239-4002
[email protected]
Thanks for the information! I just ordered a set in white and they were $41 each.
biqut2 is offline   Reply With Quote
Old 06-10-2022, 08:05 AM   #9
Bill
Site Team
 
Bill's Avatar
 
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,088
Default

Quote:
Originally Posted by DEKirk View Post
I just purchased one of the corners to replace, what is the best sealant/glue to hold this to the aluminum body?
My recollection is that the Tennessee factory used an enormous bead of silicone caulk under the trim piece, to secure it to the aluminum framing members under it. Once the strip is secured in place, you use the caulk of your choice to seal the edges of the strip.

Bill
__________________
2020 2720QS (aka 2720SL)
2014 Ford F-150 4WD 5.0L
Bill's Tech Stuff album
Bill is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trim parts Shikkapow Exterior 2 08-29-2023 01:41 PM
Bag Seal Replacement Panamapat Exterior 44 11-05-2020 10:04 AM
Roof Center Trim Caulking BradS7535 Exterior 32 09-04-2017 06:20 AM
Lesson Learned on Re-Caulking Trim Roy in Texas General Maintenance and Cleaning 0 06-08-2014 11:04 AM
Loosening Trim & Hold Down Latch Steverino Exterior 17 07-04-2006 03:45 PM


All times are GMT -6. The time now is 09:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.