TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Technical Discussions > Appliances
Register FAQ Members List Calendar

Reply
 
Thread Tools Display Modes
Old 04-21-2008, 04:49 PM   #1
roned2
Member
 
Join Date: Jan 2008
Location: Barrie, Ontario
Posts: 44
Question Television reception

Got a new LCD television today and tried to get reception in my driveway using the antenna. TV works in the house on cable ok. I plugged into the cable outlet in the trailmanor and rotated the antenna but no channels came up. Switch in the vent was on. Is there anything else I should be doing?
roned2 is offline   Reply With Quote
Old 04-21-2008, 04:54 PM   #2
Leslie & Nick
TrailManor Master
 
Leslie & Nick's Avatar
 
Join Date: Jun 2005
Location: North Georgia
Posts: 380
Default

Quote:
Originally Posted by roned2 View Post
Got a new LCD television today and tried to get reception in my driveway using the antenna. TV works in the house on cable ok. I plugged into the cable outlet in the trailmanor and rotated the antenna but no channels came up. Switch in the vent was on. Is there anything else I should be doing?
Did you try pressing the amplifier button on the switch plate ? When you do an indicator LED will come. My TV will not play via the antenna unless the amplifier is on. I don't need the amplifier if I have access to cable TV.
__________________
2002 TM 2619
2002 Ford F-150
The Camping Canines - Aubie (RIP 7/14/08), & Klondike, Zeke and Grace, Mocha
Leslie & Nick is offline   Reply With Quote
Old 04-21-2008, 04:58 PM   #3
ShrimpBurrito
Site Sponsor
 
ShrimpBurrito's Avatar
 
Join Date: Jul 2006
Location: Sunny Beaches of Los Angeles
Posts: 3,239
Default

Be sure the TV is set to receive over-the-air signals instead of a cable signal. It'll be a setting in there somewhere....Channel 20 on cable is a totally different frequency than Channel 20 over-the-air.

You might also check to see if the TV has an analog (NTSC) and/or digital (ATSC) tuner. If you have the wrong type tuner for the stations in your area, you won't be able to pick them up. Down here in the US, the analog stations will be phased out by Feb 2009.

I've never used my antenna before, but on my TM, there is a small black button on the faceplate of the coaxial connector/cigarette lighter outlet. I believe that button turns on the amplifier, so you should try turning it on.

Dave
__________________
2000 2720SL & 2007 3124KB
2005 Toyota Sequoia
Twin Battle Born 12v 100Ah LiFePO4 (BBGC2) batteries, 300W solar on rear shell, Link 10, Lift kit, Maxxis 8008 225 75/R15 E tires
ShrimpBurrito is offline   Reply With Quote
Old 04-21-2008, 04:59 PM   #4
ShrimpBurrito
Site Sponsor
 
ShrimpBurrito's Avatar
 
Join Date: Jul 2006
Location: Sunny Beaches of Los Angeles
Posts: 3,239
Default

Whoops...was writing my response when Leslie/Nick replied.
ShrimpBurrito is offline   Reply With Quote
Old 04-21-2008, 05:03 PM   #5
wmtire
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Leslie & Nick View Post
Did you try pressing the amplifier button on the switch plate ? When you do an indicator LED will come. My TV will not play via the antenna unless the amplifier is on. I don't need the amplifier if I have access to cable TV.
Like Leslie & Nick stated, mine also won't work without the amplifier being on. You will need to make sure in your tv settings that it set for either air (or antenna) and not cable. Once you are sure of everything above, you will need to let the television go thru it's auto channel search, so it can find the available local HD television stations.(unless you already know the channel numbers assigned to them).

EDIT: Whoops part 2, I too was typing my response, but Dave already answered.
  Reply With Quote
Old 04-21-2008, 08:38 PM   #6
Scott O
Guest
 
Posts: n/a
Default

Your description of what you did confused me...If you are using the antenna and not the cable, the amplifier must be on as others have said and you can rotate your antenna for the best reception. If you plugged your cable into the TM, put the antenna down and turn off the amplifier, as they are not needed. The antenna and cable are two completely different systems and can't be used at the same time. It also might be necessary to have your television do an auto channel setup for whatever source you are using...
  Reply With Quote
Old 04-22-2008, 06:37 AM   #7
roned2
Member
 
Join Date: Jan 2008
Location: Barrie, Ontario
Posts: 44
Smile

Thanks all for your replies. I found the amplifier switch and can now get some reception.
roned2 is offline   Reply With Quote
Old 05-06-2008, 08:54 AM   #8
4buster
Guest
 
Posts: n/a
Thumbs up TV Reception

I had the same problem last year with my 3124KS. I ran a temp cable from the antenna to the TV and found it worked with this cable. The dealer fixed it under warranty. During the process of troubleshooting I learned a lot about how power antennas work. I had misdiagnosed it as being the wall unit.
  Reply With Quote
Old 07-01-2008, 09:50 AM   #9
Al-n-Sue
Guest
 
Posts: n/a
Question Plug Television into cable

Quote:
Originally Posted by Scott O View Post
Your description of what you did confused me...If you are using the antenna and not the cable, the amplifier must be on as others have said and you can rotate your antenna for the best reception. If you plugged your cable into the TM, put the antenna down and turn off the amplifier, as they are not needed. The antenna and cable are two completely different systems and can't be used at the same time. It also might be necessary to have your television do an auto channel setup for whatever source you are using...
So, I've been thinking about this ever since I realized I'd be camping this fall during football season! Since my TM is folded up I can't investigate right now. If I want to plug in to a cable system at an RV park, where do I do that? I don't recall seeing a connection on the outside of the TM, but maybe I just haven't looked. Can't handle not seeing my Oklahoma Sooners play football this fall!
Thanks
Alan
  Reply With Quote
Old 07-01-2008, 09:57 AM   #10
mtnguy
Guest
 
Posts: n/a
Default

The cable and phone jacks should be just forward of your fridge vents under a covered recepticle.

Chap
  Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.