Wheel well mod on 91 tm

[hillbillyhotel]

After reading here about some of the bad bad things from tire problems , was worried about going anywhere till the mod was done, so today was the day, what i used was two old wheel wells salvaged from a rockwood popup, they was perfect on the depth, just not long enough to go from side to side,was standing there looking at it when dw says cut in half, only trying to protect the corners right,so that is what was done, put in place and marked with tire still on it and on the ground so i would know where the went after it is lifted, self-tapping sheetmetal screws, screw gun and hammer, allwas got to have a hammer, went smoother than i thought, start to finsh about 4 hr, yes get three cans of foam, use gloves,make sure dw dog is put up so she stays out of stray foam, it may not be as nice as some i have seen, but i feel good after my first real mod to the hotel,

[scrubjaysnest]

Randy,
Looks like it should work. Now you need to add the mud flap, splash guard, or what ever you want to call it to keep tire debris from the dump vale and plumbing.

Randy:
Looks real good. Congratulations on your first mod!

Bob