|
03-26-2011, 08:54 PM
|
#1
|
Guest
|
Added Storage Compartment to Trailer Tongue
Do you need convenient storage for items like your gloves, wheel chocks, stabilizer pads, rags or tongue wheel. Here's a simple solution. I found a common triangular shaped plastic oil change pan which perfectly fits the triangular open area behind the tongue jack. This is IF you have the TM swing away tongue. You will need two of these pans; one for the bottom and one for the top. http://www.amazon.com/Blitz-05075-Tr.../dp/B000CIRAGC This will provide you with a 11"x11"x11"x15" deep storage compartment. Here's how:
Bottom:
Cut away the front corner of the bottom pan so that it fits relatively close to the jack post (leave room for the larger diameter of the wheel socket). Drill nine holes through the lip of the bottom pan and the tongue. Fasten the pan to the bottom of the tongue with self-tapping hex head screws. Drill 2 or 3 weep holes in the bottom so rain water can drain, although it is a relatively dry storage.
Top:
Cut a hole slightly larger than the tongue post diameter in the front corner of the top pan. Slide the pan over the jack post and you are done.
The bottom is stationary, while the top lifts and rotates out of the way while accessing the storage compartment. There are any number of ways to fasten the top while in transit; bunge cord, straps, bailing wire, etc. Photos of compartment can be seen at:
https://picasaweb.google.com/dlw8ite...jogqa38uaW3AE#
You now have a convenient storage you didn't have before. I'd be interested to hear what you are planning to store in yours. Be sure to keep it light. Anything you add adds directly to your tongue weight.
|
|
|
07-19-2011, 07:16 PM
|
#2
|
Guest
|
added compartment to trailer tongue
I had a different idea for storing small, light weight items on the trailer tongue. I moved the battery box to the left side of the channel where it is mounted. This gave an empty space of almost 20" long. I got a suitable sized "dry Box" from tool store, and can now store: small flashlight, wheel chocks, bubble level etc.
The box is made of heavy duty plastic, so it won't rust, hasps are rust resistant, and the items can be accessed without opening the trailer first.
|
|
|
07-19-2011, 08:31 PM
|
#3
|
TrailManor Master
Join Date: Nov 2008
Location: Chicago, IL
Posts: 1,063
|
Nicely done!
__________________
2009.5 2720SL
2006 Toyota Sienna
2018 Audi Q7
|
|
|
02-06-2023, 07:06 PM
|
#4
|
New Member
Join Date: Feb 2023
Location: Kingwood, Texas
Posts: 4
|
Can you post a picture? The link does not work...
Quote:
Originally Posted by dw8ite
Do you need convenient storage for items like your gloves, wheel chocks, stabilizer pads, rags or tongue wheel. Here's a simple solution. I found a common triangular shaped plastic oil change pan which perfectly fits the triangular open area behind the tongue jack. This is IF you have the TM swing away tongue. You will need two of these pans; one for the bottom and one for the top. http://www.amazon.com/Blitz-05075-Tr.../dp/B000CIRAGC This will provide you with a 11"x11"x11"x15" deep storage compartment. Here's how:
Bottom:
Cut away the front corner of the bottom pan so that it fits relatively close to the jack post (leave room for the larger diameter of the wheel socket). Drill nine holes through the lip of the bottom pan and the tongue. Fasten the pan to the bottom of the tongue with self-tapping hex head screws. Drill 2 or 3 weep holes in the bottom so rain water can drain, although it is a relatively dry storage.
Top:
Cut a hole slightly larger than the tongue post diameter in the front corner of the top pan. Slide the pan over the jack post and you are done.
The bottom is stationary, while the top lifts and rotates out of the way while accessing the storage compartment. There are any number of ways to fasten the top while in transit; bunge cord, straps, bailing wire, etc. Photos of compartment can be seen at:
https://picasaweb.google.com/dlw8ite...jogqa38uaW3AE#
You now have a convenient storage you didn't have before. I'd be interested to hear what you are planning to store in yours. Be sure to keep it light. Anything you add adds directly to your tongue weight.
|
|
|
|
02-06-2023, 07:07 PM
|
#5
|
New Member
Join Date: Feb 2023
Location: Kingwood, Texas
Posts: 4
|
Quote:
Originally Posted by OffToDaRaces
I had a different idea for storing small, light weight items on the trailer tongue. I moved the battery box to the left side of the channel where it is mounted. This gave an empty space of almost 20" long. I got a suitable sized "dry Box" from tool store, and can now store: small flashlight, wheel chocks, bubble level etc.
The box is made of heavy duty plastic, so it won't rust, hasps are rust resistant, and the items can be accessed without opening the trailer first.
|
Can you send me a picture?
|
|
|
02-06-2023, 07:09 PM
|
#6
|
New Member
Join Date: Feb 2023
Location: Kingwood, Texas
Posts: 4
|
Quote:
Originally Posted by dw8ite
Do you need convenient storage for items like your gloves, wheel chocks, stabilizer pads, rags or tongue wheel. Here's a simple solution. I found a common triangular shaped plastic oil change pan which perfectly fits the triangular open area behind the tongue jack. This is IF you have the TM swing away tongue. You will need two of these pans; one for the bottom and one for the top. http://www.amazon.com/Blitz-05075-Tr.../dp/B000CIRAGC This will provide you with a 11"x11"x11"x15" deep storage compartment. Here's how:
Bottom:
Cut away the front corner of the bottom pan so that it fits relatively close to the jack post (leave room for the larger diameter of the wheel socket). Drill nine holes through the lip of the bottom pan and the tongue. Fasten the pan to the bottom of the tongue with self-tapping hex head screws. Drill 2 or 3 weep holes in the bottom so rain water can drain, although it is a relatively dry storage.
Top:
Cut a hole slightly larger than the tongue post diameter in the front corner of the top pan. Slide the pan over the jack post and you are done.
The bottom is stationary, while the top lifts and rotates out of the way while accessing the storage compartment. There are any number of ways to fasten the top while in transit; bunge cord, straps, bailing wire, etc. Photos of compartment can be seen at:
https://picasaweb.google.com/dlw8ite...jogqa38uaW3AE#
You now have a convenient storage you didn't have before. I'd be interested to hear what you are planning to store in yours. Be sure to keep it light. Anything you add adds directly to your tongue weight.
|
I have been looking for something like you are mentioning! What a great idea! Can you send a picture to see how it came out? The link does not work.... Thanks in advance!
|
|
|
02-06-2023, 08:34 PM
|
#7
|
TrailManor Master
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,908
|
Dude! Give them a minute to reply! Not that they will, since it doesn’t look like they’ve been on here since 2011…
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
|
|
|
02-06-2023, 08:53 PM
|
#8
|
New Member
Join Date: Feb 2023
Location: Kingwood, Texas
Posts: 4
|
Quote:
Originally Posted by Shane826
Dude! Give them a minute to reply! Not that they will, since it doesn’t look like they’ve been on here since 2011…
|
Hello Shane826,
When I posted the first message, it did not show for some reason. That is why I tried it a second time.
|
|
|
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|