Shelf Mod
I made a large curved shelf that attaches between the fridge and wall on our 2720SD. It's 24 inches long and wide. I attached it with three extra thin flush mount brackets. I attached the brackets to the fridge and wall with rubber well nuts. The shelf has to be removed to be able to slide the table in. I used 1/2 birch plywood with 3/4 X 3/4 pine supports along the edges and along the longest span. Be very careful with measurements because the flush mount brackets allow very little play. We haven't decided if we are going to paint it white or stain it oak.
|
Linear Mode
