TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > For Sale Section > Parts and Accessories Wanted
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 07-10-2021, 01:51 PM   #1
pukster
New Member
 
Join Date: Aug 2020
Posts: 3
Default White lift arm needed (front of front shell)

In need of a replacement lift arm for 2008 2619. Contacted trailmanor parts dept, and they only carry the black powder coated version (not the white).
__________________
2008 TM 2619 (purchased in 2020)
  • 40 gal fresh water tank; fold away tongue, Roof AC/Heat strip
Projects in process (for extended boondocking):
TV: 2008 Ford F150 XLT 2WD

Electric:
  • 660w (expandable to 860w) Solar PV/300 AH LifePO4 System
  • Auto transfer switch
  • Microair - Easy Start
  • Prog Dynamics LI Converter
  • Hardwired 30 AMP Surge Protector (shore)
Structural:
  • Blowout/plumbing protection options.
pukster is offline   Reply With Quote
Old 07-11-2021, 06:28 AM   #2
Onyrlef
Senior Member
 
Join Date: Aug 2019
Posts: 50
Default

Likely going to have to degloss the black arm, use a high bond white primer and epoxy white spray paint, rattle can variety. Or you may be able to talk an auto body shop into a small job.
Onyrlef is offline   Reply With Quote
Old 07-11-2021, 05:26 PM   #3
Shane826
TrailManor Master
 
Shane826's Avatar
 
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,818
Default

Pukster- I have a set in white but they are off a 2000 TM and don’t have the pocket stop screws. It would be easy enough to have someone weld a nut onto it though. Let me know if you’re interested.
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
Shane826 is online now   Reply With Quote
Old 11-11-2022, 08:53 PM   #4
Shane826
TrailManor Master
 
Shane826's Avatar
 
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,818
Default

I also now have a set in white with the pocket stop adjusters but they are the older style stirrups.
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
Shane826 is online now   Reply With Quote
Reply

Tags
lift support, lift system


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Adjusting shell height via screws at the bottom of white support arms HoMiPa Exterior 33 04-17-2023 12:42 PM
Street Side front shell bending outwards near the bottom ... A nasty fix. rickst29 Frame 5 07-27-2020 06:11 PM
How hard should it be to close and latch shells? Joesplace Exterior 16 11-04-2014 09:01 AM
Lift Arm Bolts Catching On Side of TM Brifla Exterior 7 12-05-2012 03:31 PM
Shell adjustment / alignment problems ShrimpBurrito Exterior 7 04-13-2011 09:50 AM


All times are GMT -6. The time now is 11:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.