Issue with support bars lining up 2720qb

[Frazermanor]

We are having issues with our 2720QB with the aluminum support bars not lining up. We level the trailer before opening but they are about 1/2” off. The front double bed from outside appears to be 1/2” lower on one side although the trailer is level. It is a 2022

[Bill]

Are you talking about the bed supports that swing out as you pull out the bed? Or the short (6 inch or so) aluminum swing-up bars near each corner of the trailer box?

Can you be a bit more specific about how they "don't line up"? Line up with what? Is the triangle on one side lower than on the other, resulting in a tilted bed? Are the front ones lower than the back ones? Do they sag toward the ground at the tips, resulting in a bed that sags at the front or rear edge? Help me out here.

Bill

[Frazermanor]

It is the 6” bars and the beds are not level even though the trailer reads level. I am trying to post pictures but am having problems

[Bill]

Posting pictures is easy if you follow the instructions in this article in the TM Technical Library

https://www.trailmanorowners.com/for...ad.php?t=16117

Don't miss any steps.

BTW, it is worth just scrolling though the Library to see what is there. A lot of good information has been collected and posted there.

Bill