Is my Dexter Axle still adequate or is it something else?

[Wavery]

Originally Posted by coralcruze

Apparently I need to pull a rabbit out of a hat to find it in my area Bill. �� I was told 3" is more common size. However having 1.5" now and using a lift kit that is 2.5" would bring me to over the necessary 3" that Dexter recommends and TM didn't/doesnt provide.

3" will work just fine. Just be sure that the wall thickness is 3/16" or better. The original ones from TM used to be 10G. I thought that they were pretty light when I did mine so I opted go thicker steel. I see now that the new TM ones are thicker too.

You can also find Dexter axle lift kits on etrailer.com.