TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Technical Discussions > Frame
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 09-30-2020, 03:33 PM   #1
FoosShark
Site Sponsor
 
Join Date: Feb 2019
Location: Minneapolis,MN
Posts: 22
Default Replacing the Atwood Tongue Jack, What Fits?

2005 3326 king. I need to replace the Tongue jack and everyone I find is outer tube 2-1/4" inner tube 2". The bottom hole in the A-frame is 2" so all the jacks I have found are too big to fit in that bottom hole.
Any experiences with replacing these jacks?
__________________
2005 3326 King
2004 2619 Sold
FoosShark is offline   Reply With Quote
Old 10-02-2020, 09:55 AM   #2
CA2619
Site Sponsor
 
Join Date: Sep 2020
Location: Southern California
Posts: 10
Default

I just replaced the Atwood electric jack on my 2006 2619. I used a "Stromberg Carlson" 3500 lb jack from Camping World. It bolted right on, the only recommendation is that if you have a swing hitch, run a dedicated ground wire. I had a problem of intermittent operation with out the dedicated ground wire even though the swing hitch is technically grounded through the hinge and pins.
CA2619 is offline   Reply With Quote
Old 10-02-2020, 10:01 AM   #3
FoosShark
Site Sponsor
 
Join Date: Feb 2019
Location: Minneapolis,MN
Posts: 22
Default

The lower hole in my Trailmanor is 2" the Tongue jack you installed has a
Outer tube diameter: 2-3/16" so someone must have drilled out your lower hole to at least 2-3/16"
__________________
2005 3326 King
2004 2619 Sold
FoosShark is offline   Reply With Quote
Old 10-02-2020, 10:54 AM   #4
CA2619
Site Sponsor
 
Join Date: Sep 2020
Location: Southern California
Posts: 10
Default

That is interesting. I would call Trailmanor and ask them if they have a solution for you. I realize the current factory did not build your trailer or mine
, but they have been very responsive to any of the questions I have had on parts compatibility.
CA2619 is offline   Reply With Quote
Old 10-02-2020, 11:21 AM   #5
Kidkraz
Site Sponsor
 
Kidkraz's Avatar
 
Join Date: Mar 2013
Posts: 1,037
Default

This is supposed to fit your needs, but you could call and check with the seller/manufacturer.

https://ultra-fab.com/product/ultra-...0-lb-capacity/
__________________
2013 2619
80 watt solar panel/swing hitch/low profile A/C.
Enduro 4445 caravan mover
2016 Dodge Ram 1500 V8 Hemi
Installed powered folding tow mirrors

Stopped playing with airplanes, now I just enjoy watching them fly by.
Kidkraz is online now   Reply With Quote
Old 10-02-2020, 01:48 PM   #6
FoosShark
Site Sponsor
 
Join Date: Feb 2019
Location: Minneapolis,MN
Posts: 22
Default

$220 is not what I was looking for. I am not replacing a power jack, I am replacing a sidewind Atwood 1000 lb manual jack

I am going to try using a 2" hole saw inside a 2-1/4" hole saw, so the 2" hole saw will guide the the 2-1/4" saw to make the hole 2-1/4", so any jack should work in the future.
__________________
2005 3326 King
2004 2619 Sold
FoosShark is offline   Reply With Quote
Old 10-02-2020, 03:27 PM   #7
Kidkraz
Site Sponsor
 
Kidkraz's Avatar
 
Join Date: Mar 2013
Posts: 1,037
Default

Forgive my assumption. I googled 2" outer diameter tongue jacks and these came up.


https://smile.amazon.com/gp/product/...d6b1bfbee&th=1

https://www.etrailer.com/p-DL22530.html
__________________
2013 2619
80 watt solar panel/swing hitch/low profile A/C.
Enduro 4445 caravan mover
2016 Dodge Ram 1500 V8 Hemi
Installed powered folding tow mirrors

Stopped playing with airplanes, now I just enjoy watching them fly by.
Kidkraz is online now   Reply With Quote
Old 10-02-2020, 06:58 PM   #8
FoosShark
Site Sponsor
 
Join Date: Feb 2019
Location: Minneapolis,MN
Posts: 22
Default

Quote:
Originally Posted by Kidkraz View Post
Forgive my assumption. I googled 2" outer diameter tongue jacks and these came up.


https://smile.amazon.com/gp/product/...d6b1bfbee&th=1

https://www.etrailer.com/p-DL22530.html
Thanks, the Husky is what I should have ordered.
First I ordered the Curt 5000 LB top wind jack, immediately realized that the top wind would not work with the slide on the 3326 so I tried to cancel the order and they shipped it anyway, mistake #1 then I bought the Curt 2000 LB side wind jack as I read that it was a 2" top tube and it comes and it's a 2-1/4" jack, mistake #2. Now I would/should send it back but I really don't want to deal with another amazon return and the hole needs to be larger to accept 99% of the jacks that are sold today anyway. So the hole saw project is what I will be doing.
Wish Me Luck
Thanks again.
__________________
2005 3326 King
2004 2619 Sold
FoosShark is offline   Reply With Quote
Old 10-02-2020, 07:15 PM   #9
Kidkraz
Site Sponsor
 
Kidkraz's Avatar
 
Join Date: Mar 2013
Posts: 1,037
Default

I would reach out to Curt before you cut into the frame. They can and I’m sure they want to help you to get the proper jack. If your cut is wrong, you could weaken the jack mount too much.
__________________
2013 2619
80 watt solar panel/swing hitch/low profile A/C.
Enduro 4445 caravan mover
2016 Dodge Ram 1500 V8 Hemi
Installed powered folding tow mirrors

Stopped playing with airplanes, now I just enjoy watching them fly by.
Kidkraz is online now   Reply With Quote
Old 10-02-2020, 07:23 PM   #10
FoosShark
Site Sponsor
 
Join Date: Feb 2019
Location: Minneapolis,MN
Posts: 22
Default

The lower hole is the only one that is the wrong size and all the new jacks are 2-1/4" anyway. I am just Upgrading it........
__________________
2005 3326 King
2004 2619 Sold
FoosShark is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Electric tongue jack manual crank madizzy8 Electrical 7 08-07-2015 03:17 PM
Need to replace Atwood tongue jack Elderdude Frame 51 08-21-2011 08:11 AM
atwood tongue jack... do or don't coralcrazed Exterior 4 05-17-2011 08:48 AM
Electric Tongue Jack – battery drain fix? TravlinOn Electrical 2 05-03-2011 05:58 AM
Atwood Tongue Jack not working roned2 Electrical 28 11-09-2010 05:11 PM


All times are GMT -6. The time now is 12:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.