TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Technical Discussions > Tips and Tricks
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 03-26-2011, 07:54 PM   #1
dw8ite
Guest
 
Posts: n/a
Default Added Storage Compartment to Trailer Tongue

Do you need convenient storage for items like your gloves, wheel chocks, stabilizer pads, rags or tongue wheel. Here's a simple solution. I found a common triangular shaped plastic oil change pan which perfectly fits the triangular open area behind the tongue jack. This is IF you have the TM swing away tongue. You will need two of these pans; one for the bottom and one for the top. http://www.amazon.com/Blitz-05075-Tr.../dp/B000CIRAGC This will provide you with a 11"x11"x11"x15" deep storage compartment. Here's how:

Bottom:
Cut away the front corner of the bottom pan so that it fits relatively close to the jack post (leave room for the larger diameter of the wheel socket). Drill nine holes through the lip of the bottom pan and the tongue. Fasten the pan to the bottom of the tongue with self-tapping hex head screws. Drill 2 or 3 weep holes in the bottom so rain water can drain, although it is a relatively dry storage.

Top:
Cut a hole slightly larger than the tongue post diameter in the front corner of the top pan. Slide the pan over the jack post and you are done.

The bottom is stationary, while the top lifts and rotates out of the way while accessing the storage compartment. There are any number of ways to fasten the top while in transit; bunge cord, straps, bailing wire, etc. Photos of compartment can be seen at:
https://picasaweb.google.com/dlw8ite...jogqa38uaW3AE#

You now have a convenient storage you didn't have before. I'd be interested to hear what you are planning to store in yours. Be sure to keep it light. Anything you add adds directly to your tongue weight.
  Reply With Quote
Old 07-19-2011, 06:16 PM   #2
OffToDaRaces
Guest
 
Posts: n/a
Default added compartment to trailer tongue

I had a different idea for storing small, light weight items on the trailer tongue. I moved the battery box to the left side of the channel where it is mounted. This gave an empty space of almost 20" long. I got a suitable sized "dry Box" from tool store, and can now store: small flashlight, wheel chocks, bubble level etc.

The box is made of heavy duty plastic, so it won't rust, hasps are rust resistant, and the items can be accessed without opening the trailer first.
  Reply With Quote
Old 07-19-2011, 07:31 PM   #3
ThePair
TrailManor Master
 
Join Date: Nov 2008
Location: Chicago, IL
Posts: 1,063
Default

Nicely done!
__________________
2009.5 2720SL
2006 Toyota Sienna
2018 Audi Q7
ThePair is offline   Reply With Quote
Old 02-06-2023, 06:06 PM   #4
happycoqui
New Member
 
happycoqui's Avatar
 
Join Date: Feb 2023
Location: Kingwood, Texas
Posts: 4
Default Can you post a picture? The link does not work...

Quote:
Originally Posted by dw8ite View Post
Do you need convenient storage for items like your gloves, wheel chocks, stabilizer pads, rags or tongue wheel. Here's a simple solution. I found a common triangular shaped plastic oil change pan which perfectly fits the triangular open area behind the tongue jack. This is IF you have the TM swing away tongue. You will need two of these pans; one for the bottom and one for the top. http://www.amazon.com/Blitz-05075-Tr.../dp/B000CIRAGC This will provide you with a 11"x11"x11"x15" deep storage compartment. Here's how:

Bottom:
Cut away the front corner of the bottom pan so that it fits relatively close to the jack post (leave room for the larger diameter of the wheel socket). Drill nine holes through the lip of the bottom pan and the tongue. Fasten the pan to the bottom of the tongue with self-tapping hex head screws. Drill 2 or 3 weep holes in the bottom so rain water can drain, although it is a relatively dry storage.

Top:
Cut a hole slightly larger than the tongue post diameter in the front corner of the top pan. Slide the pan over the jack post and you are done.

The bottom is stationary, while the top lifts and rotates out of the way while accessing the storage compartment. There are any number of ways to fasten the top while in transit; bunge cord, straps, bailing wire, etc. Photos of compartment can be seen at:
https://picasaweb.google.com/dlw8ite...jogqa38uaW3AE#

You now have a convenient storage you didn't have before. I'd be interested to hear what you are planning to store in yours. Be sure to keep it light. Anything you add adds directly to your tongue weight.
happycoqui is offline   Reply With Quote
Old 02-06-2023, 06:07 PM   #5
happycoqui
New Member
 
happycoqui's Avatar
 
Join Date: Feb 2023
Location: Kingwood, Texas
Posts: 4
Default

Quote:
Originally Posted by OffToDaRaces View Post
I had a different idea for storing small, light weight items on the trailer tongue. I moved the battery box to the left side of the channel where it is mounted. This gave an empty space of almost 20" long. I got a suitable sized "dry Box" from tool store, and can now store: small flashlight, wheel chocks, bubble level etc.

The box is made of heavy duty plastic, so it won't rust, hasps are rust resistant, and the items can be accessed without opening the trailer first.
Can you send me a picture?
happycoqui is offline   Reply With Quote
Old 02-06-2023, 06:09 PM   #6
happycoqui
New Member
 
happycoqui's Avatar
 
Join Date: Feb 2023
Location: Kingwood, Texas
Posts: 4
Default

Quote:
Originally Posted by dw8ite View Post
Do you need convenient storage for items like your gloves, wheel chocks, stabilizer pads, rags or tongue wheel. Here's a simple solution. I found a common triangular shaped plastic oil change pan which perfectly fits the triangular open area behind the tongue jack. This is IF you have the TM swing away tongue. You will need two of these pans; one for the bottom and one for the top. http://www.amazon.com/Blitz-05075-Tr.../dp/B000CIRAGC This will provide you with a 11"x11"x11"x15" deep storage compartment. Here's how:

Bottom:
Cut away the front corner of the bottom pan so that it fits relatively close to the jack post (leave room for the larger diameter of the wheel socket). Drill nine holes through the lip of the bottom pan and the tongue. Fasten the pan to the bottom of the tongue with self-tapping hex head screws. Drill 2 or 3 weep holes in the bottom so rain water can drain, although it is a relatively dry storage.

Top:
Cut a hole slightly larger than the tongue post diameter in the front corner of the top pan. Slide the pan over the jack post and you are done.

The bottom is stationary, while the top lifts and rotates out of the way while accessing the storage compartment. There are any number of ways to fasten the top while in transit; bunge cord, straps, bailing wire, etc. Photos of compartment can be seen at:
https://picasaweb.google.com/dlw8ite...jogqa38uaW3AE#

You now have a convenient storage you didn't have before. I'd be interested to hear what you are planning to store in yours. Be sure to keep it light. Anything you add adds directly to your tongue weight.
I have been looking for something like you are mentioning! What a great idea! Can you send a picture to see how it came out? The link does not work.... Thanks in advance!
happycoqui is offline   Reply With Quote
Old 02-06-2023, 07:34 PM   #7
Shane826
TrailManor Master
 
Shane826's Avatar
 
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,894
Default

Dude! Give them a minute to reply! Not that they will, since it doesn’t look like they’ve been on here since 2011…
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
Shane826 is online now   Reply With Quote
Old 02-06-2023, 07:53 PM   #8
happycoqui
New Member
 
happycoqui's Avatar
 
Join Date: Feb 2023
Location: Kingwood, Texas
Posts: 4
Default

Quote:
Originally Posted by Shane826 View Post
Dude! Give them a minute to reply! Not that they will, since it doesn’t look like they’ve been on here since 2011…
Hello Shane826,
When I posted the first message, it did not show for some reason. That is why I tried it a second time.
happycoqui is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cracked Frame PopBeavers Frame 120 04-22-2024 09:14 AM
Electric Tongue Jack Frenchy Frame 31 07-23-2011 10:40 PM
Things to consider about your tow vehicle when looking into a Trailer Purchase Nature Recorder Prospective Owner Questions 36 07-07-2009 10:49 PM
How to cover a TM in storage Bill TrailManor Technical Library 0 10-03-2005 03:30 PM
Trailer sway and sway control RockyMtnRay TrailManor Technical Library 0 04-02-2005 08:34 PM


All times are GMT -6. The time now is 05:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.