Tell me about the converter in a 2005 TM 2720

I just purchased a 2720 (2005) and did not get any documentation with the unit. It is in really great condition but as a retired computer guy and former street rodder, knowing how things work is part of who I am. I have a couple of pretty basic questions:
1 - Where is the converter located?
2 - The converter is really just a 'battery charger'/eliminator, correct?
3 - How do I get a set of documentation for my unit, PDF preferred. I have found and printed the excellent Mike & Kelly's 2720 PDF, the docs on the fridge, water heater and have found a pretty sad PDF of what looks like a somewhat dated (2002)owners manual.
4 - My unit does not have a battery (I will have one installed before I take it anywhere because of the breakaway requirement.) There is angle iron bracket directly behind the tanks, but I think there should be some kind of 'box' to contain the batteries.

Thanks,

Joe Daddy

[Wavery]

Originally Posted by Joe Daddy

I just purchased a 2720 (2005) and did not get any documentation with the unit. It is in really great condition but as a retired computer guy and former street rodder, knowing how things work is part of who I am. This is an interesting thread but I have a couple of pretty basic questions:
1 - Where is the converter located?
2 - The converter is really just a 'battery charger'/eliminator, correct?
3 - How do I get a set of documentation for my unit, PDF preferred. I have found and printed the excellent PDF, the docs on the fridge, water heater and have found a pretty sad PDF of what looks like a somewhat dated owners manual.
4 - My unit does not have a battery (I will have one installed before I take it anywhere because of the breakaway requirement.) There is angle iron bracket directly behind the tanks, but I think there should be some kind of 'box' to contain the batteries.

Thanks,

Joe Daddy

Yes.....converter = battery charger.

Here is a good thread that covers batteries and battery boxes...it has lots of pics as the thread progresses. I'd suggest reading the entire thread.
http://www.trailmanorowners.com/foru...ht=battery+box

Converter is located at floor level next to bathroom door. The guts are under the tub seat. If you get the model # I am sure someone will send you a manual.

Originally Posted by harveyrv

Here is a good thread that covers batteries and battery boxes...it has lots of pics as the thread progresses. I'd suggest reading the entire thread.
http://www.trailmanorowners.com/foru...ht=battery+box

Thanks for the link to the battery 'conversation' however if there were pictures there, I don't see nary a one now. I'm thinking I should just put the batteries in individual boxes and strap them to the angle iron brackets. That would work.

Joe

[Wavery]

Originally Posted by Joe Daddy

Thanks for the link to the battery 'conversation' however if there were pictures there, I don't see nary a one now. I'm thinking I should just put the batteries in individual boxes and strap them to the angle iron brackets. That would work.

Joe

If you couldn't see the pictures, it may be because you have not purchased the $12 per year membership.

It's really handy having both batteries in one, hinged, box. It's far easier to check the water, clean the battery tops and attach clip-on accessories like a portable air compressor etc.

[Bill]

In 2005, the converter was either a Magnetek/Parallax 6300 or 7300 unit, or the then-new American Enterprises unit. Either way, not a very spiffy unit, although it will be quite satisfactory if you use it carefully. In 2007, I believe, the converter was replaced with a WFCO unit, and the consensus seems to be that this is a much better unit. Once you have made the specific ID, manuals for both are available on line, or someone on this board can send one to you.

The box near the floor next to the bathroom door is called the converter, as Bob pointed out. Inside the box, behind the front panel and in a separate compartment, it also contains the AC and DC power distribution panels, including the four (more or less) circuit breakers for the AC circuits, and the nine (more or less) fuses for the DC circuits. If something stops working, and you fear that a fuse has been blown, this is where you would check.

Bill

[rickst29]

Originally Posted by Bill

In 2005, the converter was either a Magnetek/Parallax 6300 or 7300 unit, or the then-new American Enterprises unit. Either way, not a very spiffy unit, although it will be quite satisfactory if you use it carefully. In 2007, I believe, the converter was replaced with a WFCO unit, and the consensus seems to be that this is a much better unit....

Bill, the actual start date for WFCO units was a bit earlier: My built-to-order 2006 model contains one. But your guess for Joe remains perfect: If it's 2005, then it's going to be one of the predecessors.

Thanks for the quick and informative responses. I hope to get as copy of the original users manual(s) for my 2005 TM 2720.

I'm also interested in how one can obtain the above sink and stove cabinets. I've seen some of the DYI threads, but would like to have the originals if possible.

[Wavery]

Originally Posted by Joe Daddy

Thanks for the quick and informative responses. I hope to get a correct manual for my unit.

I'm also interested in how one can obtain the above sink and stove cabinets. I've seen some of the DYI threads, but would like to have the originals if possible.

It would be helpful if you went and got the name and model# off of your converter. As Bill said, there are a few different models that were installed that year.

Once you post the Manuf & Model #, someone will surely send you in the right direction.

I am looking for the original 2005 Trailmanor 2720 manual(s), not for the converter. My apology for not being clear.

Thanks!

Joe