![Reply](https://www.trailmanorowners.com/forum/images/buttons/reply.gif) |
03-18-2007, 10:20 PM
|
#1
|
Guest
|
Hitch height for 2720SL
I am setting up my 2005 just purchased 2720SL. I don't have anywhere flat enough to get an accurate measurement of the height of the hitch. I need it to set up my trailer ball height on my equalizer.
I am going to pull with a 2006 diesel Jeep Liberty. Brought it home with no WDH and really think its a great idea.
Is there any harm in drilling the holes for the sway control ball on the trailer frame?
|
|
|
03-19-2007, 09:15 AM
|
#2
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,123
|
Holes in the frame are generally frowned upon since, depending on the location and size of the hole, it can create a weak point and concentrate stresses. Any specific information about the effect of location and size would require an engineer to figure out for you.
I never heard of a sway control ball that mounts on the trailer frame. I had a Reese friction unit for a while, but the little ball mounts on the hitch at the back of the tow vehicle, not on the trailer frame. Whay kind do you have?
Bill
|
|
|
03-19-2007, 03:33 PM
|
#4
|
Site Sponsor
Join Date: May 2005
Posts: 57
|
My Tm dealer installed my sway control and hitch. They did drill four holes right in front of where the hitch fastens to the TM frame. This is where the other end of the sway control fits, it is a little ball. I,m not sure of the brand.
|
|
|
03-30-2007, 08:53 PM
|
#5
|
Guest
|
My sway control does have a tiny ball on a flat plate with holes to bolt it to the camper frame, some brands use a clamp on ball.
I will try the closest height my hitch will adjust close to 19 inches. thanks to all of you,
PS the maps you have show highlighted states, I assume they are the ones you have visited, how do you get that set up??
|
|
|
03-31-2007, 10:06 AM
|
#6
|
Guest
|
On our map it's the states we have been to with our TrailManor. If we put up the one with states we've been to it would be all colored in except New England.
|
|
|
10-03-2007, 08:21 PM
|
#7
|
Guest
|
What WDH for Jeep Liberty
Quote:
Originally Posted by RogerR
I need it to set up my trailer ball height on my equalizer. I am going to pull with a 2006 diesel Jeep Liberty. Brought it home with no WDH and really think its a great idea.
|
I have been pulling my 2720SL with a 94 Volvo 940. I just bought a 2006 Liberty CRD. What brand hitch and WDH are you using? Do you have trouble clearing the Spare Tire? Does your CRD have a Tow package? My local dealer can't tell me if there was one for the CRDs. My TM came with the 4 bolt plate mounted sway ball. My hitch is a DrawTite 75128 rated for 7500 lb WD.
|
|
|
![Reply](https://www.trailmanorowners.com/forum/images/buttons/reply.gif) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 12:38 AM.