I thought I had figured out until we discussed the fuse situation. I’ve included pictures of my setup and the location of current fuses.
Photo 1+2 Shows the 10Amp fuse coming from the solar panels to the solar Disconnect Switch, And my main 100amp fuse is protecting the TM from the battery side.
Photo 3 shows my distribution blocks where I’d connect my new 2000 watt inverter with the 1/0 conductor.
Photo 4 is my system where I will install my new inverter. I’ve wanted to make sure I’m protecting system the right way especially with the fuse types and locations. Currently, I’m stretching myself with my knowledge of this system as it has gotten more complex from battery, to solar, and now to inverter.
Let me know what you think about the fuses and anything else that would make this system work out better. I haven’t purchased all the components yet but I’m getting close. Thanks again Kurt
__________________
2nd Trailmanor. (2008 2720 QS) current 2020 2720 QS
200ah LiFePo batteries, 300W solar (going in).
Honda Ridgeline
|