Gray Water Tank Drain
Need help with Gray Water Tank drain. Our new used TM was purchased with everything missing from the tank our. I have a gray tank with a 1 7/8 round opening and everything else is missing. I went to Camping World and they told me what I need was this rubber plug (don't know what to call it. It is like the plugs they use to run electric wires through metal parts you see on cars). It has a 1 3/4 inch hole through it and the lip is cut in the middle. Don't know how else to explain it. They told me I needed to put half of the lip area from the cut inside the tank hole and the other half would be outside the tank and it would seal the hole. Then I would need to put a 1 3/4 inch plastic pipe in the hole and camp it in place. Then use reducers to get to the 3 inches I needed to install the 3 inch waste valve. Everything after installing this plug into the tank is no problem. My problem is the hole in the gray tank is 1 7/8 inches and the rubber plug is 2 1/4. So my plug is 1/4 of an inch larger. Has any one ever enlarged the gray tank opening and if so how did you do it? The hole has to be almost perfect or I am afraid it might leak. Any suggestion will really be appreciated.
This TM is becoming a money pit for us and we have not moved it from the side of the house where Camping World parked it the day they delivered it in March. I guess that is what happens when you have a person who has only seen one TM before he purchased this one. Camping World said everything worked on it. I know the water will drain right through it, but I guess they missed that in there inspection and a few other things. We were hoping to have it ready to go camping this coming week while we are on vacation. Right now it is not looking real good.
Thanks for any help.
Ray
|
Threaded Mode
