|
|
08-14-2024, 10:29 AM
|
#11
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,187
|
Another thought on a detachable power cord
A lot of folks have a detachable power cord, and they apparently like it. I don't. I dislike it almost as much as I hated the mousehole in my previous TMs.
Why? Imagine that you arrive at your camp site in the dark. To connect electric service, the first thing you need is a flashlight. That leaves you one hand to unload the cord from wherever you store it. Then find the connector at the trailer end of the cable, align the connector pins to the orientation that matches the socket. Then insert it fully into the socket, turn it (it is a twist-lock connector). Then get the threads of the locking ring started without cross-threading it, and screw it down. All with one hand. In the dark. Frustrating.
Now imagine you arrive at your campground in the rain. You can hold an umbrella, but once again, that leaves you only one (wet) hand for those moves. Or you can use two hands and get wet.
Now imagine you arrive at your campsite in the dark, and it's raining. Flashlight and umbrella? You need a third hand.
Another frustration with a detachable cord? Since you need to work with the connectors on both ends of the detachable cord, you have to haul out the entire coil, all 25 or 30 feet, and pick through the coils to grab the connectors - even if you need only 5 or 10 feet. The extra cord always gets tangled, as in AmiJab's photos above.
My suggested alternative?
o If your cord comes out through the mousehole, pull it back into the rear storage compartment. Never use the mousehole again.
o If it is not already done, hard-connect the inner end of the cord to the TM's incoming power cable ends. TM used to connect it this way, but changed in the past few years.
o When the TM is closed down, the cord is carried in the driver's-side rear bumper compartment, coiled neatly, with the campground connector on the top of the coil.
Wait! What about coiling the cord into the compartment? Isn't that a pain? No, it's not. Before you leave home for the first time ever, pull out the entire cord and lay it out straight. Then, starting at the inner end of the cord, pull the cord slowly toward you hand-over-hand, making a loop with each pull. As you make each loop, place it into the compartment on top of the earlier ones. When you finish, the cord is neatly coiled in the compartment and the campground end is on top.
Setting up in the campground? Reach into the compartment, grab the campground end, pull out only the amount you need, and plug it in. Breaking camp? Same thing in reverse. Unplug the campground end, drop it on the ground, then starting at the inner end of the cord, pull the cord in and drop it, coil by coil, onto the existing coil in the compartment. The campground end is again on top of the coil, ready for the next use. Easy-peasy.
For me this is far preferable to the fussiness and inconvenience of the detachable cord.
Bill
|
|
|
08-14-2024, 11:52 AM
|
#12
|
TrailManor Master
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,894
|
Headband flashlights solve your night time issue. If you don’t have one, get one. It should be in your toolbox anyway.
That said, I’m not a fan of the twist lock cords because like you said you have to haul out the entire cord every time. I like to use as little cord and hose as possible. If I could figure out a way to dispense water hose as needed, I would do it.
My other issue with the twist lock is it leaves a lot of room for error. If that lock isn’t twisted just right it’s a loose connection and likes to burn prongs. If you don’t attach the cover just right, you’re asking for rain to get into the electrical connection.
But yeah get yourself a headband flashlight. You can thank me later.
https://a.co/d/ihPigVn
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
|
|
|
08-14-2024, 06:28 PM
|
#13
|
TrailManor Master
Join Date: Jan 2022
Location: San Diego, California
Posts: 2,934
|
Quote:
Originally Posted by Shane826
My other issue with the twist lock is it leaves a lot of room for error. If that lock isn’t twisted just right it’s a loose connection and likes to burn prongs.
https://a.co/d/ihPigVn
|
Shane,
Evidently you may be unaware that these cables have a large nut that screws onto the electrical inlet to secure the cable and prevent loosening issues.
I had that set-up on my yacht (it's required in most marinas). It's quite waterproof.
I have installed that set-up on all of my trailers, including my current Elkmont. A lot of people have had the cable come out of the mousehole for some reason. It drags on the highway and gets ruined. That can't happen if the cable is rolled up and stored elsewhere. There's no tangled mess that you have to fight out of the mousehole and worst of all, stuffing it back in.
Bill...... that whole bad weather and nightime issue........ really a non-issue.
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
|
|
|
08-15-2024, 01:02 PM
|
#14
|
TrailManor Master
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,894
|
Yep I know there’s a big threaded “nut” on them but I’ve also seen more than a few prongs burned up because they weren’t fully engaged.
If it works for you, great! I guess I just don’t see the advantage.
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
|
|
|
08-15-2024, 03:17 PM
|
#15
|
TrailManor Master
Join Date: Jan 2022
Location: San Diego, California
Posts: 2,934
|
Quote:
Originally Posted by Shane826
Yep I know there’s a big threaded “nut” on them but I’ve also seen more than a few prongs burned up because they weren’t fully engaged.
If it works for you, great! I guess I just don’t see the advantage.
|
What works for me wasn't my point.
The advantage was for the OP....... His cable has to be replaced and doing it with the new electrical inlet is an easier option for some people. Running the cable all the way back to the converter, pulling the converter out to get to the cable and wiring the new one to the converter can be a challenge for some. I just wanted to show him this option for EZ, effective replacement.
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
|
|
|
08-18-2024, 02:06 PM
|
#16
|
Senior Member
Join Date: May 2021
Posts: 83
|
Rain water might have been another contributing factor,
as I noticed that a large amount of rain water had accumulated in my rear bumper bottom
after a very hard rain. I drilled a few small holes for drainage.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|