|
03-07-2015, 10:08 AM
|
#1
|
Member
Join Date: Feb 2015
Posts: 48
|
Swing or Removeable Hitch Retrofit
I have found a late model 2720QS without the swing hitch. I'm in Oregon, so not near any dealer that has done these retrofits. I also read the thread about the frame cracks and swing hitches. So it makes me a bit nervous to try to find someone that has enough experience to complete this retro for the first time correctly! Anybody know of any success stories getting this mod completed?
|
|
|
03-07-2015, 01:57 PM
|
#2
|
Senior Member
Join Date: Mar 2014
Location: Mesa, Arizona
Posts: 98
|
Swing or removable hitch
JS,
As far as I know this is a manufactured option that's installed when the TM is built. I'm not saying it can't be added as an after market build, but I'm really not sure who would or could do it.
Mayby some of the more experienced owners might know, or you can contact the factory.
|
|
|
03-07-2015, 04:38 PM
|
#3
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,121
|
There is at least a rumor - I haven't confirmed it - that the original swing hitch was invented by the folks at The Car Show in Colorado Springs. I know that is not particularly handy to you, but you might call them and ask if they know of anyone else that could do it. Or perhaps they could provide some detailed drawings that would enable an expert welder to duplicate it. I emphasize the word expert, because there have been failures, as you mentioned, largely caused by the use of two L-channels intead of a single shallow C-channel on the front. Mine failed that way, and a local welding shop chastened me, replaced the L-channels with a C-channel, buttoned up the edges, and it has been fine since.
Bill
|
|
|
03-07-2015, 04:41 PM
|
#4
|
Site Sponsor
Join Date: Mar 2013
Posts: 1,054
|
To piggy back to Bill's info. Here's a link to a post about letter additions.
http://www.trailmanorowners.com/foru...hlight=welding
__________________
2013 2619
80 watt solar panel/swing hitch/low profile A/C.
Enduro 4445 caravan mover
2016 Dodge Ram 1500 V8 Hemi
Installed powered folding tow mirrors
Stopped playing with airplanes, now I just enjoy watching them fly by.
|
|
|
03-08-2015, 04:57 AM
|
#5
|
TrailManor Master
Join Date: Oct 2010
Location: Big Bend area, Florida
Posts: 2,120
|
Quote:
Originally Posted by Bill
There is at least a rumor - I haven't confirmed it - that the original swing hitch was invented by the folks at The Car Show in Colorado Springs. I know that is not particularly handy to you, but you might call them and ask if they know of anyone else that could do it. Or perhaps they could provide some detailed drawings that would enable an expert welder to duplicate it. I emphasize the word expert, because there have been failures, as you mentioned, largely caused by the use of two L-channels intead of a single shallow C-channel on the front. Mine failed that way, and a local welding shop chastened me, replaced the L-channels with C-channels, buttoned up the edges, and it has been fine since.
Bill
|
That was part of the trouble with ours, the use of two L-channels instead of a C-channel.
__________________
Axis 24.1 E 450 chassis, 6 spd tranny. GVWR 14500# GVCWR 22000 # GW(scales) 12400 #
[SIGPIC][/SIGPIC]
mods: 2- 100 watt solar panels, on roof, 300 watts portable
“They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” Benjamin Franklin
|
|
|
03-08-2015, 10:10 AM
|
#6
|
Senior Member
Join Date: Jan 2015
Location: Colorful Colorado
Posts: 169
|
Swing hitch in CO SPGS
Quote:
Originally Posted by Bill
There is at least a rumor - I haven't confirmed it - that the original swing hitch was invented by the folks at The Car Show in Colorado Springs. I know that is not particularly handy to you, but you might call them and ask if they know of anyone else that could do it. Or perhaps they could provide some detailed drawings that would enable an expert welder to duplicate it. I emphasize the word expert, because there have been failures, as you mentioned, largely caused by the use of two L-channels intead of a single shallow C-channel on the front. Mine failed that way, and a local welding shop chastened me, replaced the L-channels with C-channels, buttoned up the edges, and it has been fine since.
Bill
|
Yes, I believe the above is correct.
When the lift, rear bike receiver hitch (150# rating) and installation of our inverter are complete, we will pick up our '15 2720QB from the Car Show later this month. With the other mods, we thought we may need a swing hitch but actually have room to spare w/o one.
Their quoted customer 2015 price (effective 10/01/2014) is $728 (taxes, likely not included) and I'm fairly sure all of the work is performed on site @ the CO SPGS dealership.
Interested parties may want to contact Jeff Stewart, @ the Car Show.
|
|
|
03-08-2015, 11:10 AM
|
#7
|
Senior Member
Join Date: Mar 2014
Location: Mesa, Arizona
Posts: 98
|
Swing or Removable hitch
To all,
I just checked the Trailmanor Facebook page, and checked the photo gallery and it looks like the newer models 2014 or newer with swing hitches are constructed with C-Channels instead of L-Channels, but a call to the factory will settle it for sure.
|
|
|
03-08-2015, 11:47 AM
|
#8
|
Member
Join Date: Feb 2015
Posts: 48
|
Thanks for the replies. The TM specs list the travel length at 20'-1" and the swing hitch cuts 2' off. Has anyone measured the actual length of the 2720 to the end of the frame with the hitch folded?
|
|
|
03-08-2015, 02:11 PM
|
#9
|
New Member
Join Date: Feb 2015
Location: Colorado Springs
Posts: 4
|
I purchased my 3124KB from The Car Show in Jan this year that had a regular hitch and they had a welder they work with make the swing hitch for me using C channel. This mod gives me 21" to walk around the front of the trailer.
__________________
Ray and Carolyn
Colorado Springs, CO
2015 3124KB
Boondocker 1255 MBA 55 Amp 4-Stage Converter
2015 F-150 XLT 2.7 EchoBoost FX4
Pro Series RB2 WDH
|
|
|
03-08-2015, 07:45 PM
|
#10
|
Guest
|
I would also add that you want to make the welds are done by an experienced welder. I had some welds made on a magnesium bike and they did a horrible job. Very sloppy work. My guess is some "trainee" with little experience did the weld. Learning experience for me in a number of ways, but primarily in that the weld broke.
So I'd want firm assurance that the welder knows what the h he is doing.
Good luck.
Bill do you know when TM switched from using the L to C frames?
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|