|
07-25-2010, 09:33 AM
|
#1
|
Site Sponsor
Join Date: Jul 2010
Location: Oregon
Posts: 412
|
Another Question for Tundra owners
I need to get a hitch before I go the 200 miles to pick my trailer up. I don’t have any idea what to get.
Ball size?
Do I get one that sticks strait out of does it need the drop down kind to make it lower (how much drop?)
Will I want that stabilizer thing? It seems you need like a little ball on the hitch also to hook it to.
You folks have been so helpful. I have my paper work ready to send in to join the forum.
|
|
|
07-25-2010, 09:57 AM
|
#2
|
Guest
|
Need more info. What size trailer? Does your Tundra have the factory towing package? Your question is officially do you need a weight distributing hitch (WDH) and a stabilizer? Probably not the stabilizer (the TM is so light and low that "I" don't know of anyone on this forum using one) but maybe the WDH depending on your answer to the first 2 questions! The ball is 2" on all Trailmanors. Since you don't know exactly what you need for a hitch, I would suggest an adjustable model, like Camping World http://www.campingworld.com/shopping...p-9-rise/35873 An adjustable hitch will let you fine tune your Tundra and TM when you get home.
|
|
|
07-25-2010, 10:35 AM
|
#3
|
Guest
|
I have two hitches for my Tundra/TrailManor combination. One is a WDH and I typically use it although I did do some experimenting with a non-WDH right after I purchased the Tundra. Getting the WDH to be just like you want can be a bit of a project.
My Pro-Eagle WDH came with an adjustable L-shaped shank that has about 6 holes in it and the hitch uses 3 of the holes to mount to the shank. The 6 holes therefore give you 4 mounting heights. Furthermore, it can be used in a rise or lower orientation so it has quite a bit of flexibility. I have it in the rise orientation but use it in the lowest set of holes. (The shank isn't truly L-shaped and is more like something between an L and a T.) If you get a Pro-Eagle WDH, start with this layout and you will probably be done but can adjust things to taste later.
If you want to just get the thing home and worry about getting the WDH all perfect later, you can go to Wally World and pick up one of those hitch ball/shank combinations that "stick out straight" like you say in your post. I got one of those for about 20 bucks that can be used as a 1" drop or 2" rise. The 2" rise works pretty well. You have to jack the TM tongue up quite a bit to get it on there and it will look like it is going to be way out of level but after you lower the tongue jack and the truck sags under the load it should look pretty level. (My adjustments were made with a loaded TM/Truck so YMMV)
I do not have any sway control in my rigging nor do I see any need for i. The TM tracks like it is on rails. If your Tundra is a 2007 or later model, my data should be pretty good for you.
|
|
|
07-25-2010, 11:07 AM
|
#4
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,122
|
I agree with M&M. Get a cheap straight hitch from WalMart, just to get you home. Maybe get one with a short drop - you can turn it over to get a short rise if you need it. Drive carefully. Then, at your leisure, get a WDH installed.
If you check the Technical Reference Library on this board (aka TM Info You Won't Find Anywhere Else), you'll find a WDH tutorial by RockyMtnRay, our resident Tundra expert and towing expert. Ray is a moderator on the Tundra Owners Forum.
You almost certainly do not need a sway bar (aka stabilizer bar). If you decide that you do want to get one, do not get a friction sway control (the one with the little ball you describe). Instead, you will choose a particular WDH design that is called trunnion dual-cam - it has a much better sway control built in. Again, there is a tutorial in the Technical Reference Library.
Bill
|
|
|
07-25-2010, 05:55 PM
|
#5
|
Site Sponsor
Join Date: Jul 2010
Location: Oregon
Posts: 412
|
I have the 2027SL and the Tundra does have the factory tow pac. Any suggestions as to where to shop on line for WDH? I have a swing hitch any recommendations for what WDH to get?
|
|
|
07-25-2010, 07:18 PM
|
#6
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,122
|
I have a Reese trunnion-style dual-cam WDH, and it works fine on my TM, which has a swing tongue. Other names with very similar hitches are Draw-Tite and Hidden Hitch. I'm not familiar with Valley, and how it would work with a swing tongue. You can even get a good hitch, installed, from U-Haul - it will probably be a Hidden Hitch.
More expensive hitches can be had from Equal-I-Zer and others. I'm not convinced that they are worth any more, but many of our members have them and are pleased.
As I recall, someone had a problem with a Curt hitch interfering with the swing tongue.
As for where to buy, an Internet search may be your best bet. They are heavy, of course, so don't forget to check into shipping cost. Choose one that is rated for 750-1000 pounds. If you buy one on-line, you may need a local installer. Sometimes they bolt on to existing holes in the vehicles frame, so check into that as well.
Bill
|
|
|
07-27-2010, 12:52 PM
|
#7
|
TrailManor Master
Join Date: Aug 2007
Location: Williamsburg, VA
Posts: 668
|
Where to buy...
Do a Google search on "tundra trailer hitch" and you'll get a zillion hits. I purchased my last two hitches and hitch receivers online, and saved a lot of money. For my TM a couple years ago, I bought a Hidden Hitch from Adventure RV in Pigeon Forge (no relation), who was selling them on Ebay. Be sure it's rated for your trailer and tongue weight.
When you think you have one picked out, go to the manufacturer's web page and download the installation instructions so that you can see what's involved. You should be able to buy one that lines up perfectly for your vehicle.
__________________
2005 TrailManor 3023
2003 Toyota Highlander 220hp V6 FWD
Reese 1000# round bar Weight Distributing Hitch
Prodigy brake controller.
"It's not how fast you can go, it's how fast you can stop an RV that counts."
|
|
|
07-27-2010, 02:45 PM
|
#8
|
Senior Member
Join Date: Oct 2007
Posts: 146
|
Don't forget to get a brake controller. They are easy to install with the wiring kit that comes with Toyota trucks with the towing package.
__________________
Bill and Jane
2003 3124 KS, 2007 Tundra 4X4 TRD
Reese WDH, Prodigy
|
|
|
07-27-2010, 04:47 PM
|
#9
|
TrailManor Master
Join Date: Oct 2005
Location: Gloucester, VA
Posts: 340
|
I'd suggest looking at the Equal-i-zer Hitch. It's the easiest one to set up and use that I've ever dealt with. I always did hate the chain type units. Just my personal preference.
__________________
2006 TM2720 w/Lift and 15" Maxxis 225 75R15 E Tires
2004 GMC Sierra 4X4 w/Prodigy
2014 Durango 3.6L AWD w/Equal-i-zer Hitch & Prodigy
|
|
|
07-27-2010, 10:06 PM
|
#10
|
Guest
|
I got a Reese Pro WDH with 1200 lb bars for about $225. from the dealer. Fits on the swing hitch just fine. I paid them $50 to install it, which was silly after I saw how easy it was. You can use it as a regular "sticking out" ball mount hitch, then figure the rest out and attach the bars later.........like they say above, make sure you have your brake controller hooked up. Takes longer to figure out where to mount it then to connect it.
The fun is just starting! LOL
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|