|
|
04-04-2009, 08:50 AM
|
#1
|
Site Sponsor
Join Date: Oct 2007
Location: Gardendale, TX
Posts: 44
|
front shell clearance for innerspring mattress??
I'm trying to solve the "hard bed" problem. Several camping sites offer an RV innerspring mattress that's 8" thick. From previous posts, I'm pretty sure the rear shell won't close on something that thick. How about the clearance in the front shell? Anybody ever measured it? I've got a 3023.
Thanks
RIM
__________________
Roger Martin
2001 TM 3023 (new to me!)
2002 F150 SupCrw 5.4L & tow pkg
|
|
|
04-04-2009, 01:56 PM
|
#2
|
Guest
|
rear shell clearance
Quote:
Originally Posted by rimartin58
I'm trying to solve the "hard bed" problem. Several camping sites offer an RV innerspring mattress that's 8" thick. From previous posts, I'm pretty sure the rear shell won't close on something that thick. How about the clearance in the front shell? Anybody ever measured it? I've got a 3023.
|
RIM - FWIW - in our 3124 we tried to add a 2 inch memory foam mattress topper to the bed and the shell would not close. The latches were a good inch to inch and a half away from being able to close. We could have removed the topper each time, but one of our goals with this camper was to be able to set up and NOT have to make the bed!
We changed to a 1 inch topper and we are able to close the shell (with a little effort). The 2 incher made the bed very comfortable. My wife says the 1 inch one is marginal. I slept well on the original TM mattress, but, then, if DW doesn't sleep well, no one is happy!
Alan
(PS - I found a place on the web that will cut custom sizes of memory foam. Not sure how well they would work and they are not cheap.
http://www.foamproducts.net/index.cfm)
|
|
|
04-04-2009, 03:45 PM
|
#3
|
Guest
|
We solved the hard mattress problem with a good quality AeorBed. Others have had good luck with a mattress topper like Al and Sue. I don't remember seeing any other viable options on this list.
|
|
|
04-04-2009, 04:24 PM
|
#4
|
Guest
|
Scott,
You said that you solved the hard mattress issue with a good quality aerobed. Did you remove the TM mattress or did you just put the aerobed on top of the TM mattress?
Tina
|
|
|
04-04-2009, 06:21 PM
|
#5
|
Guest
|
We removed the factory mattress as it wasn't at all necessary with the AeroBed. The only problem with the AeroBed was figuring out which model we wanted. They make about a zillion different ones. I think we would up getting it from Amazon.
|
|
|
04-05-2009, 08:56 AM
|
#6
|
Guest
|
Like Scott we also upgraded to an Aerobed. Best move we could make short of spending $$$$ on a Select Comfort bed like we have at home. We were able to take advantage of a closeout on a particular model that allowed each side to be adjustable to the firmness desired of the occupant. They don't make them anymore (I checked on their web site), but might in the future if they get enough demand.
A couple of things to keep in mind if you go the Aerobed route. Firstly, you will need to let some or all of the air out of the bed when you tear down the TM. It is appx. 9 inches tall fully inflated. This isn't a big deal as it takes about a minute to inflate/deflate. Secondly, power might (or might not) be an issue. Ours requires power to operate the pump. Not a problem in a park with hookups, but if you boondock you will need a means of getting power to the pump. We have a Xantec powerpack 400 portable power pack. It produces more than enough to operate the pump. Also, I see that some of the Aerobeds now have a battery operated pump that you could charge b4 you go on your trip therefor eliminating the need of external power.
Mike Anderson
|
|
|
04-05-2009, 12:14 PM
|
#7
|
Site Sponsor
Join Date: Jun 2005
Location: Raleigh, NC
Posts: 200
|
replacement foam in matress
I was planning on replacing the existing matress foam with a softer foam for the bed. I have a 2" memory foam mattress topper that needs to be removed to close the TM. The new foam will be about $120.00 from a foam outlet. I plan on doing some matress comfort testing in the store.
Any comments?
__________________
Joe's Junk (AKA Joe Makarczyk Raleigh, NC)
2007 3124KS TV 2003 Toyota Tundra V8
Previous TM 2000 2720
|
|
|
04-05-2009, 02:15 PM
|
#8
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,122
|
When you are comfort testing in the store, remember that the store will set up the mattress on a box spring. In the TM you won't have a box spring, so it may feel different. Unless the store will put the mattress on the floor, I'm not sure how to do a real test.
Bill
|
|
|
04-05-2009, 07:39 PM
|
#9
|
TrailManor Master
Join Date: Dec 2008
Location: Ventura County, CA
Posts: 273
|
The TM mattress was too firm for us as well.
We ended up getting memory foam toppers at Walmart.
http://www.walmart.com/catalog/produ...ct_id=10378952
They are 1.5" thick. On the front bed, we just fold the topper in half towards the front so the rear shell can come down with no extra effort.
Seems to be enough clearance everywhere else.
--jim
__________________
Former:
2009 2619 w/swing tongue
TV 2010 Tacoma Dbl Cab PreRunner
Prodigy Brake Controller/TST TPMS
15" Maxxis M8008 225/75R15
Honda EU2000i (Tri-Fuel Converted)
160W Solar/Morningstar Sunsaver MPPT
Xantrex Link-Lite & ProWatt SW2000 Inverter
Current:
2016 KZ Vision 23BHS
2015 Ford F150 SuperCrew 3.5 EcoBoost
|
|
|
04-06-2009, 01:18 PM
|
#10
|
Guest
|
We did the whole add-the-topper and the padded mattress cover "thhing," but we are addicted to our Select Comfort. Now we are known as the "ones who put select comforts in their TM." We have a king size bed shelf in our TM and bought two long twin Select Comforts. We have to take the mattresses off and stow them long-side up in the aisle of the TM when we close down. We leave the long twin sheets and bed pads on them and either sleep in sleeping bags or under a King sized sheet and blanket depending on weather. In the 3124, there is exactly enough room between the wardrobe and the chair (which is a recliner in ours). Now, what it does take is someone strong enough to lift the mattresses onto the bed shelf, but we both agree that we sleep very well in our TM. Queen
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|