[Pater C]

I went to chef a few of the things. When I hook up my TV and TM and pull the brake controller to manually activate the brakes I get 13.4

I also looked at my TM brake lights. The picture is from the left light which is the one that seems to have a short. The light works or not according to how tight the screw is in the upper left. That screw does not bite very well so it comes and goes. I am not sure what you where suggesting to measure with hte bulbs removed. The bottom lights had .2 amps. The top light had no amps because they were not activated.

I will have to wait for daylight to check the resistance on the TM bargeman or roll down the street and test the brakes.