TrailManor Owner's Forum - View Single Post

05-21-2007, 10:01 AM

Assuming that you can easily get to the pump, use a volt meter to see if you have 12 volts at the pump when the switch is on.

If you have 12 volts, check the pump.

If you don't have 12 volts, check the fuse and wiring.

05-21-2007, 10:01 AM	#5
PopBeavers Guest Posts: n/a	Assuming that you can easily get to the pump, use a volt meter to see if you have 12 volts at the pump when the switch is on. If you have 12 volts, check the pump. If you don't have 12 volts, check the fuse and wiring.