Quote:
Originally Posted by Jim&Joan
...I have more issues with the caster being a bit sloppy on the post, causing it to want to cant one way or the other...
|
'Sloppy on the post" should be made worse by cranking it higher (by cranking up the post, "slop" would allow more slopping with a longer post length, right?). And cranking it even a foot or two higher wouldn't appreciably change the weight carried on the post (the same trailer loads are basically still in the same positions horizontally).
The swivel of the caster wheel would move the support point for the tongue plus or minus a few inches, though, with a lighter tongue load when pushing the trailer backwards vs pulling it frontwards. A few inches probably wouldn't amount to much. But a swing tongue that moves the tongue support point from from 2 feet forward to 2 feet back should have a considerable effect (for example, reducing the effective distance of the post to the axle from about 120" to about 70" would add substantially to the weight on the post and caster wheel).
Something else to play with on the scale.