View Single Post
Old 08-04-2022, 04:41 PM   #4
TMfor4ofus
Senior Member
 
TMfor4ofus's Avatar
 
Join Date: May 2016
Location: Huntington Beach, CA
Posts: 83
Default

Well I think I found the problem. First of all it worked on AC as I verified that. So I went about cleaning the burner area and when I started banging on the flue pipe chunks of soot were falling out! So I think the pipe was blocked by the soot just above the burner. Which explains why even with a decent flame it didn't work very well. The pipes got warm before but now they get HOT. On AC they got hot but not nearly as hot on LP before I cleaned it out. I stuck two warm Coors Light cans in the fridge this morning. Now after being on all day (on LP)they are blue and cold. There's still kind of a burnt smell that permeates into the RV and around the back of the fridge I cant see why though? Now i just have the water dripping out of the city inlet when the pump is on. One way valve or WP is bad? I just replaced the WP a year and a half ago. Edit -- I think Bill just answered that one for me.
__________________
2011 2720QB Loaded from factory plus a few upgrades
TV 2019 F150 S Crew FX4 3.5 EB
TMfor4ofus is offline   Reply With Quote