Quote:
Originally Posted by rtcassel
Using the tongue jack, raise the back of the TV high enough so that the bars can be easily pulled free of the brackets on the TM.
|
OK, meaning just wiggle them to see if they move freely within the limits of the clip (before removing the clip and sliding them out).
Tell me if I've got it:
Hitching:
- raise the tongue to allow the ball to fit under the coupler
- lower the tongue to fit and lock the coupler and ball
- raise the tongue with coupler and ball about 5-8"
- insert and secure the spring arms
- retract the jack all the way
- connect safety cables and electric connection
Unhitching:
- raise the tongue/ball enough to release the spring arms (per the wiggle test)
- unlatch and swing out the spring arms
- lower the tongue to the neutral point to release the ball and coupler
- unhook safety cables, electric connection
Do I get it? Forgetting anything? Thanks in advance.