Quote:
Originally Posted by Kmikesell
Can you take some additional pictures of it open? DW wants this mod as well.
|
Sure thing.
I first removed the 8) angle mounting brackets that secured the table to the tm wall completely.
I used 4) 1-3/4" x 22" drawer slides. One at top and bottom of each table. I used a angle grinder with an .045" cutoff wheel to countersink the slide into the legs a 1/4" deep or so.
I also used 4) pieces of 1-1/2" x 3/4" x 21" long chunks of plywood strips as a backer between the 2 legs and for something to screw the drawer slide into..
There is probably a better tool to use to countersink than an angle grinder but i could not find anything in my shop