youtube video showing air vent below gravity water inlet
Quote:
Originally Posted by Bill
... I bet if you find a way to detach the entire black piece from the trailer wall (probably 2 or 3 screws), you could rotate it 180 degrees so the nipple is at the top. (Maybe only 120 degrees if the vent hose is too short.) Then re-attach it. Drill new screw holes if needed, and caulk around it. Yes, the vent hose will be a bit lower than the fill hose - but who cares? It just means that the tank will begin to overflow when the water level is 1/2 inch lower than before.
|
__________________
Tim
2004 2720SL TrailManor, 2 X T105, Trimetric 2030RV, TST TPMS
2003 Tundra Access V8 2X4 w/Tow Pkg
Equal-i-zer 1000, Prodigy, McKesh, UnderCover
|