[Shane826]

Yep sounds like you found the answer. Sounds like a slight bend in the torsion bar. The other thing you can try, make sure the lift arm heights are correct. If that RF arm is a bit longer, then it has to buckle and will push the torsion bar outward.

Jacob at the factory explained this all to me when I had the same problem with my 3326. He said they can tweak the torsion bar back inward but it’s really difficult if you don’t have the right tools (I didn’t ask what those tools might be). The other fix is a new torsion bar, but those should be replaced in pairs.